1 files changed, 1037 insertions, 0 deletions
diff --git a/Graphic_Equalizer_v1.0/Graphic_Equalizer_DK2.hp b/Graphic_Equalizer_v1.0/Graphic_Equalizer_DK2.hp
new file mode 100644
index 0000000..01b5936
--- /dev/null
+++ b/Graphic_Equalizer_v1.0/Graphic_Equalizer_DK2.hp
@@ -0,0 +1,1037 @@
+#@hp
+type chip
+configuration Release EDIF
+configuration FastLoad_Debug EDIF
+configuration FastLoad EDIF
+configuration Full_Debug EDIF
+configuration Full EDIF
+configuration Build_All EDIF
+configuration Buil_Partial EDIF
+configuration Shutdown_Releasebuild EDIF
+configuration RC203E_Full_Debug EDIF
+setting Release debug false
+setting Release warnings true
+setting Release parfunc false
+setting Release parchan false
+setting Release parmem false
+setting Release rewrite true
+setting Release high true
+setting Release cse true
+setting Release pcse true
+setting Release rcse true
+setting Release cr true
+setting Release rcr true
+setting Release browse true
+setting Release estimate false
+setting Release noTimeCon false
+setting Release ignoreInclDirs false
+setting Release ignoreLibDirs false
+setting Release noFastCarry false
+setting Release mapper true
+setting Release netlistSimulator false
+setting Release useCustomBuild false
+setting Release exclude false
+setting Release target edif
+setting Release target.compile edif
+setting Release family XilinxVirtexII
+setting Release family.lib none
+setting Release vTool Generic
+setting Release netExp speed
+setting Release outDir Release
+setting Release intDir Release
+setting Release part XC2V1000-4-FG456
+setting Release define:NDEBUG true
+setting Release define:USE_ true
+setting Release define:USE_RC200E true
+setting Release "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Release include:include true
+setting Release include:..\\Support_Libs\\debug false
+setting Release lib:stdlib.hcl true
+setting Release lib:rc200e.hcl true
+setting Release lib:pal_rc200e.hcl true
+setting Release "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Release define:HANDELCV3 false
+setting Release define:SIMULATE false
+setting Release define:DEBUG false
+setting Release define:USE_RC100 false
+setting Release define:NSIMULATE false
+setting Release define:USE_SIM false
+setting Release define:USE_ADMXRC2 false
+setting Release define:USE_NIOS false
+setting Release define:USE_NDB false
+setting Release define:USE_RC1000 false
+setting Release define:USE_RC200 false
+setting Release define:USE_ARMSTRIPE false
+setting Release define:USE_EDB false
+setting Release define:USE_V2PRO false
+setting Release define:USE_MV2P false
+setting Release define:RC200 false
+setting Release include:..\\..\\Support_Libs\\debug false
+setting Release lib:rc100.hcl false
+setting Release lib:pal_rc100.hcl false
+setting Release lib:pal_framebuffer16.hcl false
+setting Release lib:sim.hcl false
+setting Release lib:pal_sim.hcl false
+setting Release lib:admxrc2.hcl false
+setting Release lib:pal_admxrc2.hcl false
+setting Release lib:pal_console.hcl false
+setting Release lib:ndb.hcl false
+setting Release lib:pal_ndb.hcl false
+setting Release lib:rc1000.hcl false
+setting Release lib:pal_rc1000.hcl false
+setting Release lib:rc200.hcl false
+setting Release lib:pal_rc200.hcl false
+setting Release lib:pal_keyboard.hcl false
+setting Release lib:pal_framebuffer8.hcl false
+setting Release lib:pal_framebufferdb.hcl false
+setting Release lib:edb.hcl false
+setting Release lib:pal_edb.hcl false
+setting Release lib:mv2p.hcl false
+setting Release lib:pal_mv2p.hcl false
+setting Release lib:pal_mouse.hcl false
+setting Release "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting Release "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Release ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting Release define:HAVE_DEBUG false
+setting Release "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting Release "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting Release "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting Release include:..\\..\\..\\include false
+setting Release include:C:\\Project_CVS\\Support_Libs\\debug false
+setting Release define:HAVE_SMARTMEDIA true
+setting Release define:USE_RUNFFT true
+setting Release define:HARDWARE_MULTIPLY true
+setting Release define:PERFORM_FFT_CALCULATION true
+setting Release define:USE_UNSIGNED_AUDIO false
+setting Release define:_CONFIGURATION_HCH true
+setting Release include:data true
+setting Release define:BUILD_ALL false
+setting Release define:HAVE_LOADER_ONLY false
+setting Release define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+setting Release define:USE_RC203E false
+setting Release "include:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Release lib:rc203e.hcl false
+setting Release lib:pal_rc203e.hcl false
+setting Release "libdir:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+command Release "cd Release"
+command Release "call edifmake_rc200_optimized Graphic_Equalizer_dk2"
+output Release bin\\Graphic_Equalizer.bit
+setting FastLoad_Debug debug true
+setting FastLoad_Debug warnings true
+setting FastLoad_Debug parfunc false
+setting FastLoad_Debug parchan false
+setting FastLoad_Debug parmem false
+setting FastLoad_Debug rewrite true
+setting FastLoad_Debug high true
+setting FastLoad_Debug cse true
+setting FastLoad_Debug pcse true
+setting FastLoad_Debug rcse true
+setting FastLoad_Debug cr true
+setting FastLoad_Debug rcr true
+setting FastLoad_Debug browse true
+setting FastLoad_Debug estimate false
+setting FastLoad_Debug noTimeCon false
+setting FastLoad_Debug ignoreInclDirs false
+setting FastLoad_Debug ignoreLibDirs false
+setting FastLoad_Debug noFastCarry false
+setting FastLoad_Debug mapper true
+setting FastLoad_Debug netlistSimulator false
+setting FastLoad_Debug useCustomBuild false
+setting FastLoad_Debug exclude false
+setting FastLoad_Debug target edif
+setting FastLoad_Debug target.compile edif
+setting FastLoad_Debug family XilinxVirtexII
+setting FastLoad_Debug family.lib none
+setting FastLoad_Debug vTool Generic
+setting FastLoad_Debug netExp speed
+setting FastLoad_Debug outDir FastLoad_Debug
+setting FastLoad_Debug intDir FastLoad_Debug
+setting FastLoad_Debug part XC2V1000-4-FG456
+setting FastLoad_Debug define:NDEBUG true
+setting FastLoad_Debug define:HANDELCV3 false
+setting FastLoad_Debug define:SIMULATE false
+setting FastLoad_Debug define:DEBUG false
+setting FastLoad_Debug define:USE_ true
+setting FastLoad_Debug define:USE_RC100 false
+setting FastLoad_Debug define:NSIMULATE false
+setting FastLoad_Debug define:USE_SIM false
+setting FastLoad_Debug define:USE_ADMXRC2 false
+setting FastLoad_Debug define:USE_NIOS false
+setting FastLoad_Debug define:USE_NDB false
+setting FastLoad_Debug define:USE_RC1000 false
+setting FastLoad_Debug define:USE_RC200 false
+setting FastLoad_Debug define:USE_RC200E true
+setting FastLoad_Debug define:USE_ARMSTRIPE false
+setting FastLoad_Debug define:USE_EDB false
+setting FastLoad_Debug define:USE_V2PRO false
+setting FastLoad_Debug define:USE_MV2P false
+setting FastLoad_Debug define:RC200 false
+setting FastLoad_Debug lib:stdlib.hcl true
+setting FastLoad_Debug lib:rc100.hcl false
+setting FastLoad_Debug lib:pal_rc100.hcl false
+setting FastLoad_Debug lib:pal_framebuffer16.hcl false
+setting FastLoad_Debug lib:sim.hcl false
+setting FastLoad_Debug lib:pal_sim.hcl false
+setting FastLoad_Debug lib:admxrc2.hcl false
+setting FastLoad_Debug lib:pal_admxrc2.hcl false
+setting FastLoad_Debug lib:pal_console.hcl false
+setting FastLoad_Debug lib:ndb.hcl false
+setting FastLoad_Debug lib:pal_ndb.hcl false
+setting FastLoad_Debug lib:rc1000.hcl false
+setting FastLoad_Debug lib:pal_rc1000.hcl false
+setting FastLoad_Debug lib:rc200.hcl false
+setting FastLoad_Debug lib:pal_rc200.hcl false
+setting FastLoad_Debug lib:rc200e.hcl true
+setting FastLoad_Debug lib:pal_rc200e.hcl true
+setting FastLoad_Debug lib:pal_keyboard.hcl false
+setting FastLoad_Debug lib:pal_framebuffer8.hcl false
+setting FastLoad_Debug lib:pal_framebufferdb.hcl false
+setting FastLoad_Debug lib:edb.hcl false
+setting FastLoad_Debug lib:pal_edb.hcl false
+setting FastLoad_Debug lib:mv2p.hcl false
+setting FastLoad_Debug lib:pal_mv2p.hcl false
+setting FastLoad_Debug lib:pal_mouse.hcl false
+setting FastLoad_Debug ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting FastLoad_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting FastLoad_Debug "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting FastLoad_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting FastLoad_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting FastLoad_Debug include:..\\..\\..\\include false
+setting FastLoad_Debug include:include true
+setting FastLoad_Debug include:..\\Support_Libs\\debug true
+setting FastLoad_Debug include:C:\\Project_CVS\\Support_Libs\\debug false
+setting FastLoad_Debug "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting FastLoad_Debug "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting FastLoad_Debug "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting FastLoad_Debug define:HAVE_DEBUG true
+setting FastLoad_Debug define:HAVE_SMARTMEDIA false
+setting FastLoad_Debug define:USE_RUNFFT true
+setting FastLoad_Debug define:HARDWARE_MULTIPLY true
+setting FastLoad_Debug define:PERFORM_FFT_CALCULATION true
+setting FastLoad_Debug define:USE_UNSIGNED_AUDIO false
+setting FastLoad_Debug include:..\\..\\Support_Libs\\debug false
+setting FastLoad_Debug define:_CONFIGURATION_HCH true
+setting FastLoad_Debug include:data true
+setting FastLoad_Debug define:BUILD_ALL false
+setting FastLoad_Debug define:HAVE_LOADER_ONLY false
+setting FastLoad_Debug define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+setting FastLoad_Debug "include:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting FastLoad_Debug "libdir:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting FastLoad_Debug define:USE_RC203E false
+setting FastLoad_Debug lib:rc203e.hcl false
+setting FastLoad_Debug lib:pal_rc203e.hcl false
+command FastLoad_Debug "cd FastLoad_Debug"
+command FastLoad_Debug "call edifmake_rc200_unoptimized Graphic_Equalizer_dk2"
+output FastLoad_Debug bin\\Graphic_Equalizer.bit
+setting FastLoad debug true
+setting FastLoad warnings true
+setting FastLoad parfunc false
+setting FastLoad parchan false
+setting FastLoad parmem false
+setting FastLoad rewrite true
+setting FastLoad high true
+setting FastLoad cse true
+setting FastLoad pcse true
+setting FastLoad rcse true
+setting FastLoad cr true
+setting FastLoad rcr true
+setting FastLoad browse true
+setting FastLoad estimate false
+setting FastLoad noTimeCon false
+setting FastLoad ignoreInclDirs false
+setting FastLoad ignoreLibDirs false
+setting FastLoad noFastCarry false
+setting FastLoad mapper true
+setting FastLoad netlistSimulator false
+setting FastLoad useCustomBuild false
+setting FastLoad exclude false
+setting FastLoad target edif
+setting FastLoad target.compile edif
+setting FastLoad family XilinxVirtexII
+setting FastLoad family.lib none
+setting FastLoad vTool Generic
+setting FastLoad netExp speed
+setting FastLoad outDir FastLoad
+setting FastLoad intDir FastLoad
+setting FastLoad part XC2V1000-4-FG456
+setting FastLoad define:NDEBUG true
+setting FastLoad define:HANDELCV3 false
+setting FastLoad define:SIMULATE false
+setting FastLoad define:DEBUG false
+setting FastLoad define:USE_ true
+setting FastLoad define:USE_RC100 false
+setting FastLoad define:NSIMULATE false
+setting FastLoad define:USE_SIM false
+setting FastLoad define:USE_ADMXRC2 false
+setting FastLoad define:USE_NIOS false
+setting FastLoad define:USE_NDB false
+setting FastLoad define:USE_RC1000 false
+setting FastLoad define:USE_RC200 false
+setting FastLoad define:USE_RC200E true
+setting FastLoad define:USE_ARMSTRIPE false
+setting FastLoad define:USE_EDB false
+setting FastLoad define:USE_V2PRO false
+setting FastLoad define:USE_MV2P false
+setting FastLoad define:RC200 false
+setting FastLoad lib:stdlib.hcl true
+setting FastLoad lib:rc100.hcl false
+setting FastLoad lib:pal_rc100.hcl false
+setting FastLoad lib:pal_framebuffer16.hcl false
+setting FastLoad lib:sim.hcl false
+setting FastLoad lib:pal_sim.hcl false
+setting FastLoad lib:admxrc2.hcl false
+setting FastLoad lib:pal_admxrc2.hcl false
+setting FastLoad lib:pal_console.hcl false
+setting FastLoad lib:ndb.hcl false
+setting FastLoad lib:pal_ndb.hcl false
+setting FastLoad lib:rc1000.hcl false
+setting FastLoad lib:pal_rc1000.hcl false
+setting FastLoad lib:rc200.hcl false
+setting FastLoad lib:pal_rc200.hcl false
+setting FastLoad lib:rc200e.hcl true
+setting FastLoad lib:pal_rc200e.hcl true
+setting FastLoad lib:pal_keyboard.hcl false
+setting FastLoad lib:pal_framebuffer8.hcl false
+setting FastLoad lib:pal_framebufferdb.hcl false
+setting FastLoad lib:edb.hcl false
+setting FastLoad lib:pal_edb.hcl false
+setting FastLoad lib:mv2p.hcl false
+setting FastLoad lib:pal_mv2p.hcl false
+setting FastLoad lib:pal_mouse.hcl false
+setting FastLoad ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting FastLoad "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting FastLoad "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting FastLoad "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting FastLoad "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting FastLoad include:..\\..\\..\\include false
+setting FastLoad include:include true
+setting FastLoad include:..\\Support_Libs\\debug false
+setting FastLoad include:C:\\Project_CVS\\Support_Libs\\debug false
+setting FastLoad "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting FastLoad "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting FastLoad "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting FastLoad define:HAVE_DEBUG false
+setting FastLoad define:HAVE_SMARTMEDIA false
+setting FastLoad define:USE_RUNFFT true
+setting FastLoad define:HARDWARE_MULTIPLY true
+setting FastLoad define:PERFORM_FFT_CALCULATION true
+setting FastLoad define:USE_UNSIGNED_AUDIO false
+setting FastLoad include:..\\..\\Support_Libs\\debug false
+setting FastLoad define:_CONFIGURATION_HCH true
+setting FastLoad include:data true
+setting FastLoad define:BUILD_ALL false
+setting FastLoad define:HAVE_LOADER_ONLY false
+setting FastLoad define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+setting FastLoad define:USE_RC203E false
+setting FastLoad "include:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting FastLoad lib:rc203e.hcl false
+setting FastLoad lib:pal_rc203e.hcl false
+setting FastLoad "libdir:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+command FastLoad "cd FastLoad"
+command FastLoad "call edifmake_rc200_unoptimized Graphic_Equalizer_dk2"
+output FastLoad bin\\Graphic_Equalizer.bit
+setting Full_Debug debug true
+setting Full_Debug warnings true
+setting Full_Debug parfunc false
+setting Full_Debug parchan false
+setting Full_Debug parmem false
+setting Full_Debug rewrite true
+setting Full_Debug high true
+setting Full_Debug cse true
+setting Full_Debug pcse true
+setting Full_Debug rcse true
+setting Full_Debug cr true
+setting Full_Debug rcr true
+setting Full_Debug browse true
+setting Full_Debug estimate false
+setting Full_Debug noTimeCon false
+setting Full_Debug ignoreInclDirs false
+setting Full_Debug ignoreLibDirs false
+setting Full_Debug noFastCarry false
+setting Full_Debug mapper true
+setting Full_Debug netlistSimulator false
+setting Full_Debug useCustomBuild false
+setting Full_Debug exclude false
+setting Full_Debug target edif
+setting Full_Debug target.compile edif
+setting Full_Debug family XilinxVirtexII
+setting Full_Debug family.lib none
+setting Full_Debug vTool Generic
+setting Full_Debug netExp speed
+setting Full_Debug outDir Full_Debug
+setting Full_Debug intDir Full_Debug
+setting Full_Debug part XC2V1000-4-FG456
+setting Full_Debug define:NDEBUG true
+setting Full_Debug define:USE_ true
+setting Full_Debug define:USE_RC200E true
+setting Full_Debug "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Full_Debug include:include true
+setting Full_Debug include:..\\Support_Libs\\debug true
+setting Full_Debug lib:stdlib.hcl true
+setting Full_Debug lib:rc200e.hcl true
+setting Full_Debug lib:pal_rc200e.hcl true
+setting Full_Debug "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Full_Debug define:HANDELCV3 false
+setting Full_Debug define:SIMULATE false
+setting Full_Debug define:DEBUG false
+setting Full_Debug define:USE_RC100 false
+setting Full_Debug define:NSIMULATE false
+setting Full_Debug define:USE_SIM false
+setting Full_Debug define:USE_ADMXRC2 false
+setting Full_Debug define:USE_NIOS false
+setting Full_Debug define:USE_NDB false
+setting Full_Debug define:USE_RC1000 false
+setting Full_Debug define:USE_RC200 false
+setting Full_Debug define:USE_ARMSTRIPE false
+setting Full_Debug define:USE_EDB false
+setting Full_Debug define:USE_V2PRO false
+setting Full_Debug define:USE_MV2P false
+setting Full_Debug define:RC200 false
+setting Full_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting Full_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting Full_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting Full_Debug include:..\\..\\..\\include false
+setting Full_Debug include:C:\\Project_CVS\\Support_Libs\\debug false
+setting Full_Debug lib:rc100.hcl false
+setting Full_Debug lib:pal_rc100.hcl false
+setting Full_Debug lib:pal_framebuffer16.hcl false
+setting Full_Debug lib:sim.hcl false
+setting Full_Debug lib:pal_sim.hcl false
+setting Full_Debug lib:admxrc2.hcl false
+setting Full_Debug lib:pal_admxrc2.hcl false
+setting Full_Debug lib:pal_console.hcl false
+setting Full_Debug lib:ndb.hcl false
+setting Full_Debug lib:pal_ndb.hcl false
+setting Full_Debug lib:rc1000.hcl false
+setting Full_Debug lib:pal_rc1000.hcl false
+setting Full_Debug lib:rc200.hcl false
+setting Full_Debug lib:pal_rc200.hcl false
+setting Full_Debug lib:pal_keyboard.hcl false
+setting Full_Debug lib:pal_framebuffer8.hcl false
+setting Full_Debug lib:pal_framebufferdb.hcl false
+setting Full_Debug lib:edb.hcl false
+setting Full_Debug lib:pal_edb.hcl false
+setting Full_Debug lib:mv2p.hcl false
+setting Full_Debug lib:pal_mv2p.hcl false
+setting Full_Debug lib:pal_mouse.hcl false
+setting Full_Debug "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting Full_Debug "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting Full_Debug ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting Full_Debug define:HAVE_DEBUG true
+setting Full_Debug include:..\\..\\Support_Libs\\debug false
+setting Full_Debug define:HAVE_SMARTMEDIA true
+setting Full_Debug define:USE_RUNFFT true
+setting Full_Debug define:HARDWARE_MULTIPLY true
+setting Full_Debug define:PERFORM_FFT_CALCULATION true
+setting Full_Debug define:USE_UNSIGNED_AUDIO false
+setting Full_Debug define:_CONFIGURATION_HCH true
+setting Full_Debug include:data true
+setting Full_Debug define:BUILD_ALL false
+setting Full_Debug define:HAVE_LOADER_ONLY false
+setting Full_Debug define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+setting Full_Debug "include:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Full_Debug "libdir:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Full_Debug define:USE_RC203E false
+setting Full_Debug lib:rc203e.hcl false
+setting Full_Debug lib:pal_rc203e.hcl false
+command Full_Debug "cd Full_Debug"
+command Full_Debug "call edifmake_rc200_unoptimized Graphic_Equalizer_dk2"
+output Full_Debug bin\\Graphic_Equalizer.bit
+setting Full debug true
+setting Full warnings true
+setting Full parfunc false
+setting Full parchan false
+setting Full parmem false
+setting Full rewrite true
+setting Full high true
+setting Full cse true
+setting Full pcse true
+setting Full rcse true
+setting Full cr true
+setting Full rcr true
+setting Full browse true
+setting Full estimate false
+setting Full noTimeCon false
+setting Full ignoreInclDirs false
+setting Full ignoreLibDirs false
+setting Full noFastCarry false
+setting Full mapper true
+setting Full netlistSimulator false
+setting Full useCustomBuild false
+setting Full exclude false
+setting Full target edif
+setting Full target.compile edif
+setting Full family XilinxVirtexII
+setting Full family.lib none
+setting Full vTool Generic
+setting Full netExp speed
+setting Full outDir Full
+setting Full intDir Full
+setting Full part XC2V1000-4-FG456
+setting Full define:NDEBUG true
+setting Full define:USE_ true
+setting Full define:USE_RC200E true
+setting Full "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Full include:include true
+setting Full include:..\\Support_Libs\\debug false
+setting Full lib:stdlib.hcl true
+setting Full lib:rc200e.hcl true
+setting Full lib:pal_rc200e.hcl true
+setting Full "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Full define:HANDELCV3 false
+setting Full define:SIMULATE false
+setting Full define:DEBUG false
+setting Full define:USE_RC100 false
+setting Full define:NSIMULATE false
+setting Full define:USE_SIM false
+setting Full define:USE_ADMXRC2 false
+setting Full define:USE_NIOS false
+setting Full define:USE_NDB false
+setting Full define:USE_RC1000 false
+setting Full define:USE_RC200 false
+setting Full define:USE_ARMSTRIPE false
+setting Full define:USE_EDB false
+setting Full define:USE_V2PRO false
+setting Full define:USE_MV2P false
+setting Full define:RC200 false
+setting Full "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting Full "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting Full "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting Full include:..\\..\\..\\include false
+setting Full include:C:\\Project_CVS\\Support_Libs\\debug false
+setting Full lib:rc100.hcl false
+setting Full lib:pal_rc100.hcl false
+setting Full lib:pal_framebuffer16.hcl false
+setting Full lib:sim.hcl false
+setting Full lib:pal_sim.hcl false
+setting Full lib:admxrc2.hcl false
+setting Full lib:pal_admxrc2.hcl false
+setting Full lib:pal_console.hcl false
+setting Full lib:ndb.hcl false
+setting Full lib:pal_ndb.hcl false
+setting Full lib:rc1000.hcl false
+setting Full lib:pal_rc1000.hcl false
+setting Full lib:rc200.hcl false
+setting Full lib:pal_rc200.hcl false
+setting Full lib:pal_keyboard.hcl false
+setting Full lib:pal_framebuffer8.hcl false
+setting Full lib:pal_framebufferdb.hcl false
+setting Full lib:edb.hcl false
+setting Full lib:pal_edb.hcl false
+setting Full lib:mv2p.hcl false
+setting Full lib:pal_mv2p.hcl false
+setting Full lib:pal_mouse.hcl false
+setting Full "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting Full "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting Full ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting Full define:HAVE_DEBUG false
+setting Full include:..\\..\\Support_Libs\\debug false
+setting Full define:HAVE_SMARTMEDIA true
+setting Full define:USE_RUNFFT true
+setting Full define:HARDWARE_MULTIPLY true
+setting Full define:PERFORM_FFT_CALCULATION true
+setting Full define:USE_UNSIGNED_AUDIO false
+setting Full define:_CONFIGURATION_HCH true
+setting Full include:data true
+setting Full define:BUILD_ALL false
+setting Full define:HAVE_LOADER_ONLY false
+setting Full define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+setting Full define:USE_RC203E false
+setting Full "include:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Full lib:rc203e.hcl false
+setting Full lib:pal_rc203e.hcl false
+setting Full "libdir:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+command Full "cd Full"
+command Full "call edifmake_rc200_unoptimized graphic_equalizer_dk2"
+output Full bin\\Graphic_Equalizer.bit
+setting Build_All debug true
+setting Build_All warnings true
+setting Build_All parfunc false
+setting Build_All parchan false
+setting Build_All parmem false
+setting Build_All rewrite true
+setting Build_All high true
+setting Build_All cse true
+setting Build_All pcse true
+setting Build_All rcse true
+setting Build_All cr true
+setting Build_All rcr true
+setting Build_All browse true
+setting Build_All estimate false
+setting Build_All noTimeCon false
+setting Build_All ignoreInclDirs false
+setting Build_All ignoreLibDirs false
+setting Build_All noFastCarry false
+setting Build_All mapper true
+setting Build_All netlistSimulator false
+setting Build_All useCustomBuild false
+setting Build_All exclude false
+setting Build_All target edif
+setting Build_All target.compile edif
+setting Build_All family XilinxVirtexII
+setting Build_All family.lib none
+setting Build_All vTool Generic
+setting Build_All netExp speed
+setting Build_All outDir Build_All
+setting Build_All intDir Build_All
+setting Build_All part XC2V1000-4-FG456
+setting Build_All define:NDEBUG true
+setting Build_All define:USE_ true
+setting Build_All define:USE_RC200E true
+setting Build_All "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting Build_All include:include true
+setting Build_All include:..\\Support_Libs\\debug false
+setting Build_All lib:stdlib.hcl true
+setting Build_All lib:rc200e.hcl true
+setting Build_All lib:pal_rc200e.hcl true
+setting Build_All "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting Build_All define:HANDELCV3 false
+setting Build_All define:SIMULATE false
+setting Build_All define:DEBUG false
+setting Build_All define:USE_RC100 false
+setting Build_All define:NSIMULATE false
+setting Build_All define:USE_SIM false
+setting Build_All define:USE_ADMXRC2 false
+setting Build_All define:USE_NIOS false
+setting Build_All define:USE_NDB false
+setting Build_All define:USE_RC1000 false
+setting Build_All define:USE_RC200 false
+setting Build_All define:USE_ARMSTRIPE false
+setting Build_All define:USE_EDB false
+setting Build_All define:USE_V2PRO false
+setting Build_All define:USE_MV2P false
+setting Build_All define:RC200 false
+setting Build_All include:..\\..\\Support_Libs\\debug false
+setting Build_All lib:rc100.hcl false
+setting Build_All lib:pal_rc100.hcl false
+setting Build_All lib:pal_framebuffer16.hcl false
+setting Build_All lib:sim.hcl false
+setting Build_All lib:pal_sim.hcl false
+setting Build_All lib:admxrc2.hcl false
+setting Build_All lib:pal_admxrc2.hcl false
+setting Build_All lib:pal_console.hcl false
+setting Build_All lib:ndb.hcl false
+setting Build_All lib:pal_ndb.hcl false
+setting Build_All lib:rc1000.hcl false
+setting Build_All lib:pal_rc1000.hcl false
+setting Build_All lib:rc200.hcl false
+setting Build_All lib:pal_rc200.hcl false
+setting Build_All lib:pal_keyboard.hcl false
+setting Build_All lib:pal_framebuffer8.hcl false
+setting Build_All lib:pal_framebufferdb.hcl false
+setting Build_All lib:edb.hcl false
+setting Build_All lib:pal_edb.hcl false
+setting Build_All lib:mv2p.hcl false
+setting Build_All lib:pal_mv2p.hcl false
+setting Build_All lib:pal_mouse.hcl false
+setting Build_All "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting Build_All "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Build_All ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting Build_All define:HAVE_DEBUG false
+setting Build_All "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Build_All "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting Build_All "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting Build_All include:..\\..\\..\\include false
+setting Build_All include:C:\\Project_CVS\\Support_Libs\\debug false
+setting Build_All define:HAVE_SMARTMEDIA true
+setting Build_All define:USE_RUNFFT true
+setting Build_All define:HARDWARE_MULTIPLY true
+setting Build_All define:PERFORM_FFT_CALCULATION true
+setting Build_All define:USE_UNSIGNED_AUDIO false
+setting Build_All define:_CONFIGURATION_HCH true
+setting Build_All include:data true
+setting Build_All define:BUILD_ALL true
+setting Build_All define:HAVE_LOADER_ONLY false
+setting Build_All define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+command Build_All "cd Build_All"
+command Build_All "call edifmake_rc200_optimized Graphic_Equalizer"
+output Build_All bin\\Graphic_Equalizer.bit
+setting Buil_Partial debug true
+setting Buil_Partial warnings true
+setting Buil_Partial parfunc false
+setting Buil_Partial parchan false
+setting Buil_Partial parmem false
+setting Buil_Partial rewrite true
+setting Buil_Partial high true
+setting Buil_Partial cse true
+setting Buil_Partial pcse true
+setting Buil_Partial rcse true
+setting Buil_Partial cr true
+setting Buil_Partial rcr true
+setting Buil_Partial browse true
+setting Buil_Partial estimate false
+setting Buil_Partial noTimeCon false
+setting Buil_Partial ignoreInclDirs false
+setting Buil_Partial ignoreLibDirs false
+setting Buil_Partial noFastCarry false
+setting Buil_Partial mapper true
+setting Buil_Partial netlistSimulator false
+setting Buil_Partial useCustomBuild false
+setting Buil_Partial exclude false
+setting Buil_Partial target edif
+setting Buil_Partial target.compile edif
+setting Buil_Partial family XilinxVirtexII
+setting Buil_Partial family.lib none
+setting Buil_Partial vTool Generic
+setting Buil_Partial netExp speed
+setting Buil_Partial outDir Build_Partial
+setting Buil_Partial intDir Build_Partial
+setting Buil_Partial part XC2V1000-4-FG456
+setting Buil_Partial define:NDEBUG true
+setting Buil_Partial define:USE_ true
+setting Buil_Partial define:USE_RC200E true
+setting Buil_Partial "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting Buil_Partial include:include true
+setting Buil_Partial include:..\\Support_Libs\\debug false
+setting Buil_Partial lib:stdlib.hcl true
+setting Buil_Partial lib:rc200e.hcl true
+setting Buil_Partial lib:pal_rc200e.hcl true
+setting Buil_Partial "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting Buil_Partial define:HANDELCV3 false
+setting Buil_Partial define:SIMULATE false
+setting Buil_Partial define:DEBUG false
+setting Buil_Partial define:USE_RC100 false
+setting Buil_Partial define:NSIMULATE false
+setting Buil_Partial define:USE_SIM false
+setting Buil_Partial define:USE_ADMXRC2 false
+setting Buil_Partial define:USE_NIOS false
+setting Buil_Partial define:USE_NDB false
+setting Buil_Partial define:USE_RC1000 false
+setting Buil_Partial define:USE_RC200 false
+setting Buil_Partial define:USE_ARMSTRIPE false
+setting Buil_Partial define:USE_EDB false
+setting Buil_Partial define:USE_V2PRO false
+setting Buil_Partial define:USE_MV2P false
+setting Buil_Partial define:RC200 false
+setting Buil_Partial include:..\\..\\Support_Libs\\debug false
+setting Buil_Partial lib:rc100.hcl false
+setting Buil_Partial lib:pal_rc100.hcl false
+setting Buil_Partial lib:pal_framebuffer16.hcl false
+setting Buil_Partial lib:sim.hcl false
+setting Buil_Partial lib:pal_sim.hcl false
+setting Buil_Partial lib:admxrc2.hcl false
+setting Buil_Partial lib:pal_admxrc2.hcl false
+setting Buil_Partial lib:pal_console.hcl false
+setting Buil_Partial lib:ndb.hcl false
+setting Buil_Partial lib:pal_ndb.hcl false
+setting Buil_Partial lib:rc1000.hcl false
+setting Buil_Partial lib:pal_rc1000.hcl false
+setting Buil_Partial lib:rc200.hcl false
+setting Buil_Partial lib:pal_rc200.hcl false
+setting Buil_Partial lib:pal_keyboard.hcl false
+setting Buil_Partial lib:pal_framebuffer8.hcl false
+setting Buil_Partial lib:pal_framebufferdb.hcl false
+setting Buil_Partial lib:edb.hcl false
+setting Buil_Partial lib:pal_edb.hcl false
+setting Buil_Partial lib:mv2p.hcl false
+setting Buil_Partial lib:pal_mv2p.hcl false
+setting Buil_Partial lib:pal_mouse.hcl false
+setting Buil_Partial "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting Buil_Partial "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Buil_Partial ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting Buil_Partial define:HAVE_DEBUG false
+setting Buil_Partial "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Buil_Partial "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting Buil_Partial "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting Buil_Partial include:..\\..\\..\\include false
+setting Buil_Partial include:C:\\Project_CVS\\Support_Libs\\debug false
+setting Buil_Partial define:HAVE_SMARTMEDIA true
+setting Buil_Partial define:USE_RUNFFT true
+setting Buil_Partial define:HARDWARE_MULTIPLY true
+setting Buil_Partial define:PERFORM_FFT_CALCULATION true
+setting Buil_Partial define:USE_UNSIGNED_AUDIO false
+setting Buil_Partial define:_CONFIGURATION_HCH true
+setting Buil_Partial include:data true
+setting Buil_Partial define:BUILD_ALL false
+setting Buil_Partial define:HAVE_GRAPHIC_EQUALIZER_ONLY true
+setting Buil_Partial define:HAVE_LOADER_ONLY false
+command Buil_Partial "cd Build_Partial"
+command Buil_Partial "call edifmake_rc200_optimized Graphic_Equalizer"
+output Buil_Partial bin\\Graphic_Equalizer.bit
+setting Shutdown_Releasebuild debug true
+setting Shutdown_Releasebuild warnings true
+setting Shutdown_Releasebuild parfunc false
+setting Shutdown_Releasebuild parchan false
+setting Shutdown_Releasebuild parmem false
+setting Shutdown_Releasebuild rewrite true
+setting Shutdown_Releasebuild high true
+setting Shutdown_Releasebuild cse true
+setting Shutdown_Releasebuild pcse true
+setting Shutdown_Releasebuild rcse true
+setting Shutdown_Releasebuild cr true
+setting Shutdown_Releasebuild rcr true
+setting Shutdown_Releasebuild browse true
+setting Shutdown_Releasebuild estimate false
+setting Shutdown_Releasebuild noTimeCon false
+setting Shutdown_Releasebuild ignoreInclDirs false
+setting Shutdown_Releasebuild ignoreLibDirs false
+setting Shutdown_Releasebuild noFastCarry false
+setting Shutdown_Releasebuild mapper true
+setting Shutdown_Releasebuild netlistSimulator false
+setting Shutdown_Releasebuild useCustomBuild false
+setting Shutdown_Releasebuild exclude false
+setting Shutdown_Releasebuild target edif
+setting Shutdown_Releasebuild target.compile edif
+setting Shutdown_Releasebuild family XilinxVirtexII
+setting Shutdown_Releasebuild family.lib none
+setting Shutdown_Releasebuild vTool Generic
+setting Shutdown_Releasebuild netExp speed
+setting Shutdown_Releasebuild outDir Shutdown
+setting Shutdown_Releasebuild intDir Shutdown
+setting Shutdown_Releasebuild part XC2V1000-4-FG456
+setting Shutdown_Releasebuild define:NDEBUG true
+setting Shutdown_Releasebuild define:USE_ true
+setting Shutdown_Releasebuild define:USE_RC200E true
+setting Shutdown_Releasebuild "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting Shutdown_Releasebuild include:include true
+setting Shutdown_Releasebuild include:..\\Support_Libs\\debug true
+setting Shutdown_Releasebuild lib:stdlib.hcl true
+setting Shutdown_Releasebuild lib:rc200e.hcl true
+setting Shutdown_Releasebuild lib:pal_rc200e.hcl true
+setting Shutdown_Releasebuild "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting Shutdown_Releasebuild define:HANDELCV3 false
+setting Shutdown_Releasebuild define:SIMULATE false
+setting Shutdown_Releasebuild define:DEBUG false
+setting Shutdown_Releasebuild define:USE_RC100 false
+setting Shutdown_Releasebuild define:NSIMULATE false
+setting Shutdown_Releasebuild define:USE_SIM false
+setting Shutdown_Releasebuild define:USE_ADMXRC2 false
+setting Shutdown_Releasebuild define:USE_NIOS false
+setting Shutdown_Releasebuild define:USE_NDB false
+setting Shutdown_Releasebuild define:USE_RC1000 false
+setting Shutdown_Releasebuild define:USE_RC200 false
+setting Shutdown_Releasebuild define:USE_ARMSTRIPE false
+setting Shutdown_Releasebuild define:USE_EDB false
+setting Shutdown_Releasebuild define:USE_V2PRO false
+setting Shutdown_Releasebuild define:USE_MV2P false
+setting Shutdown_Releasebuild define:RC200 false
+setting Shutdown_Releasebuild include:..\\..\\Support_Libs\\debug false
+setting Shutdown_Releasebuild lib:rc100.hcl false
+setting Shutdown_Releasebuild lib:pal_rc100.hcl false
+setting Shutdown_Releasebuild lib:pal_framebuffer16.hcl false
+setting Shutdown_Releasebuild lib:sim.hcl false
+setting Shutdown_Releasebuild lib:pal_sim.hcl false
+setting Shutdown_Releasebuild lib:admxrc2.hcl false
+setting Shutdown_Releasebuild lib:pal_admxrc2.hcl false
+setting Shutdown_Releasebuild lib:pal_console.hcl false
+setting Shutdown_Releasebuild lib:ndb.hcl false
+setting Shutdown_Releasebuild lib:pal_ndb.hcl false
+setting Shutdown_Releasebuild lib:rc1000.hcl false
+setting Shutdown_Releasebuild lib:pal_rc1000.hcl false
+setting Shutdown_Releasebuild lib:rc200.hcl false
+setting Shutdown_Releasebuild lib:pal_rc200.hcl false
+setting Shutdown_Releasebuild lib:pal_keyboard.hcl false
+setting Shutdown_Releasebuild lib:pal_framebuffer8.hcl false
+setting Shutdown_Releasebuild lib:pal_framebufferdb.hcl false
+setting Shutdown_Releasebuild lib:edb.hcl false
+setting Shutdown_Releasebuild lib:pal_edb.hcl false
+setting Shutdown_Releasebuild lib:mv2p.hcl false
+setting Shutdown_Releasebuild lib:pal_mv2p.hcl false
+setting Shutdown_Releasebuild lib:pal_mouse.hcl false
+setting Shutdown_Releasebuild "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting Shutdown_Releasebuild "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting Shutdown_Releasebuild ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting Shutdown_Releasebuild define:HAVE_DEBUG true
+setting Shutdown_Releasebuild "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Shutdown_Releasebuild "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting Shutdown_Releasebuild "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting Shutdown_Releasebuild include:..\\..\\..\\include false
+setting Shutdown_Releasebuild include:C:\\Project_CVS\\Support_Libs\\debug false
+setting Shutdown_Releasebuild define:HAVE_SMARTMEDIA false
+setting Shutdown_Releasebuild define:USE_RUNFFT true
+setting Shutdown_Releasebuild define:HARDWARE_MULTIPLY true
+setting Shutdown_Releasebuild define:PERFORM_FFT_CALCULATION true
+setting Shutdown_Releasebuild define:USE_UNSIGNED_AUDIO false
+setting Shutdown_Releasebuild define:_CONFIGURATION_HCH true
+setting Shutdown_Releasebuild include:data true
+setting Shutdown_Releasebuild define:BUILD_ALL false
+setting Shutdown_Releasebuild define:HAVE_LOADER_ONLY false
+setting Shutdown_Releasebuild define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+setting Shutdown_Releasebuild define:USE_RC203E false
+setting Shutdown_Releasebuild "include:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting Shutdown_Releasebuild lib:rc203e.hcl false
+setting Shutdown_Releasebuild lib:pal_rc203e.hcl false
+setting Shutdown_Releasebuild "libdir:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+command Shutdown_Releasebuild "cd Shutdown"
+command Shutdown_Releasebuild "call edifmake_rc200_optimized Graphic_Equalizer_dk2"
+command Shutdown_Releasebuild "shutdown -fs now"
+output Shutdown_Releasebuild bin\\Graphic_Equalizer.bit
+setting RC203E_Full_Debug debug true
+setting RC203E_Full_Debug warnings true
+setting RC203E_Full_Debug parfunc false
+setting RC203E_Full_Debug parchan false
+setting RC203E_Full_Debug parmem false
+setting RC203E_Full_Debug rewrite true
+setting RC203E_Full_Debug high true
+setting RC203E_Full_Debug cse true
+setting RC203E_Full_Debug pcse true
+setting RC203E_Full_Debug rcse true
+setting RC203E_Full_Debug cr true
+setting RC203E_Full_Debug rcr true
+setting RC203E_Full_Debug browse true
+setting RC203E_Full_Debug estimate false
+setting RC203E_Full_Debug noTimeCon false
+setting RC203E_Full_Debug ignoreInclDirs false
+setting RC203E_Full_Debug ignoreLibDirs false
+setting RC203E_Full_Debug noFastCarry false
+setting RC203E_Full_Debug mapper true
+setting RC203E_Full_Debug netlistSimulator false
+setting RC203E_Full_Debug useCustomBuild false
+setting RC203E_Full_Debug exclude false
+setting RC203E_Full_Debug target edif
+setting RC203E_Full_Debug target.compile edif
+setting RC203E_Full_Debug family XilinxVirtexII
+setting RC203E_Full_Debug family.lib none
+setting RC203E_Full_Debug vTool Generic
+setting RC203E_Full_Debug netExp speed
+setting RC203E_Full_Debug outDir Full_Debug
+setting RC203E_Full_Debug intDir Full_Debug
+setting RC203E_Full_Debug part XC2V3000-4-FG676
+setting RC203E_Full_Debug define:NDEBUG true
+setting RC203E_Full_Debug define:USE_ true
+setting RC203E_Full_Debug define:USE_RC200E false
+setting RC203E_Full_Debug "include:C:\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting RC203E_Full_Debug include:include true
+setting RC203E_Full_Debug include:..\\Support_Libs\\debug true
+setting RC203E_Full_Debug lib:stdlib.hcl true
+setting RC203E_Full_Debug lib:rc200e.hcl false
+setting RC203E_Full_Debug lib:pal_rc200e.hcl false
+setting RC203E_Full_Debug "libdir:C:\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting RC203E_Full_Debug define:HANDELCV3 false
+setting RC203E_Full_Debug define:SIMULATE false
+setting RC203E_Full_Debug define:DEBUG false
+setting RC203E_Full_Debug define:USE_RC100 false
+setting RC203E_Full_Debug define:NSIMULATE false
+setting RC203E_Full_Debug define:USE_SIM false
+setting RC203E_Full_Debug define:USE_ADMXRC2 false
+setting RC203E_Full_Debug define:USE_NIOS false
+setting RC203E_Full_Debug define:USE_NDB false
+setting RC203E_Full_Debug define:USE_RC1000 false
+setting RC203E_Full_Debug define:USE_RC200 false
+setting RC203E_Full_Debug define:USE_ARMSTRIPE false
+setting RC203E_Full_Debug define:USE_EDB false
+setting RC203E_Full_Debug define:USE_V2PRO false
+setting RC203E_Full_Debug define:USE_MV2P false
+setting RC203E_Full_Debug define:RC200 false
+setting RC203E_Full_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" true
+setting RC203E_Full_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\includes" false
+setting RC203E_Full_Debug "include:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\" false
+setting RC203E_Full_Debug include:..\\..\\..\\include false
+setting RC203E_Full_Debug include:C:\\Project_CVS\\Support_Libs\\debug false
+setting RC203E_Full_Debug lib:rc100.hcl false
+setting RC203E_Full_Debug lib:pal_rc100.hcl false
+setting RC203E_Full_Debug lib:pal_framebuffer16.hcl false
+setting RC203E_Full_Debug lib:sim.hcl false
+setting RC203E_Full_Debug lib:pal_sim.hcl false
+setting RC203E_Full_Debug lib:admxrc2.hcl false
+setting RC203E_Full_Debug lib:pal_admxrc2.hcl false
+setting RC203E_Full_Debug lib:pal_console.hcl false
+setting RC203E_Full_Debug lib:ndb.hcl false
+setting RC203E_Full_Debug lib:pal_ndb.hcl false
+setting RC203E_Full_Debug lib:rc1000.hcl false
+setting RC203E_Full_Debug lib:pal_rc1000.hcl false
+setting RC203E_Full_Debug lib:rc200.hcl false
+setting RC203E_Full_Debug lib:pal_rc200.hcl false
+setting RC203E_Full_Debug lib:pal_keyboard.hcl false
+setting RC203E_Full_Debug lib:pal_framebuffer8.hcl false
+setting RC203E_Full_Debug lib:pal_framebufferdb.hcl false
+setting RC203E_Full_Debug lib:edb.hcl false
+setting RC203E_Full_Debug lib:pal_edb.hcl false
+setting RC203E_Full_Debug lib:mv2p.hcl false
+setting RC203E_Full_Debug lib:pal_mv2p.hcl false
+setting RC203E_Full_Debug lib:pal_mouse.hcl false
+setting RC203E_Full_Debug "lib:C:\\Program Files\\Celoxica\\PDK\\Hardware\\Lib\\stdlib.hcl" false
+setting RC203E_Full_Debug "libdir:R:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" true
+setting RC203E_Full_Debug ansimodules:..\\..\\..\\Software\\Lib\\PalSim.lib false
+setting RC203E_Full_Debug define:HAVE_DEBUG true
+setting RC203E_Full_Debug include:..\\..\\Support_Libs\\debug false
+setting RC203E_Full_Debug define:HAVE_SMARTMEDIA true
+setting RC203E_Full_Debug define:USE_RUNFFT true
+setting RC203E_Full_Debug define:HARDWARE_MULTIPLY true
+setting RC203E_Full_Debug define:PERFORM_FFT_CALCULATION true
+setting RC203E_Full_Debug define:USE_UNSIGNED_AUDIO false
+setting RC203E_Full_Debug define:_CONFIGURATION_HCH true
+setting RC203E_Full_Debug include:data true
+setting RC203E_Full_Debug define:BUILD_ALL false
+setting RC203E_Full_Debug define:HAVE_LOADER_ONLY false
+setting RC203E_Full_Debug define:HAVE_GRAPHIC_EQUALIZER_ONLY false
+setting RC203E_Full_Debug "include:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\include" false
+setting RC203E_Full_Debug "libdir:r:\\c2hardw\\Program Files\\celoxica\\pdk\\hardware\\lib" false
+setting RC203E_Full_Debug define:USE_RC203E true
+setting RC203E_Full_Debug lib:rc203e.hcl true
+setting RC203E_Full_Debug lib:pal_rc203e.hcl true
+command RC203E_Full_Debug "cd Full_Debug"
+command RC203E_Full_Debug "call edifmake_rc200_unoptimized Graphic_Equalizer"
+output RC203E_Full_Debug bin\\Graphic_Equalizer.bit
+document include\\audio.hch {
+    type hch
+}
+document include\\configuration.hch {
+    type hch
+}
+document include\\display.hch {
+    type hch
+}
+document include\\display_shared.hch {
+    type hch
+}
+document include\\eventhandler.hch {
+    type hch
+}
+document include\\eventhandler_shared.hch {
+    type hch
+}
+document include\\events.hch {
+    type hch
+}
+document include\\fft.hch {
+    type hch
+}
+document include\\mouse.hch {
+    type hch
+}
+document include\\mouse_shared.hch {
+    type hch
+}
+document include\\smartmedia.hch {
+    type hch
+}
+document include\\smartmedia_shared.hch {
+    type hch
+}
+document include\\weights_256.hch {
+    type hch
+}
+document src\\audio.hcc {
+    type hcc
+}
+document src\\display.hcc {
+    type hcc
+}
+document src\\eventhandler.hcc {
+    type hcc
+}
+document src\\events.hcc {
+    type hcc
+}
+document src\\fft.hcc {
+    type hcc
+}
+document src\\main.hcc {
+    type hcc
+}
+document src\\mouse.hcc {
+    type hcc
+}
+document src\\smartmedia.hcc {
+    type hcc
+}
+document ..\\support_libs\\debug\\debug.hcc {
+    type hcc
+}
+document ..\\support_libs\\debug\\debug.hch {
+    type hch
+}
+document src\\runfft.hcc {
+    type hcc
+}