From 484b7775238cfd0354b18e5238a3ce4b2bf0335f Mon Sep 17 00:00:00 2001 From: Oliver Schinagl Date: Tue, 12 Apr 2011 06:38:58 +0000 Subject: no executable permissions, no dos filetypes --- uClinux-2.4.20-uc1/include/linux/usb_ch9.h | 770 ++++++++++++++--------------- 1 file changed, 385 insertions(+), 385 deletions(-) diff --git a/uClinux-2.4.20-uc1/include/linux/usb_ch9.h b/uClinux-2.4.20-uc1/include/linux/usb_ch9.h index 7badb38..6dd87c6 100755 --- a/uClinux-2.4.20-uc1/include/linux/usb_ch9.h +++ b/uClinux-2.4.20-uc1/include/linux/usb_ch9.h @@ -1,385 +1,385 @@ -/* - * This file holds USB constants and structures that are needed for USB - * device APIs. These are used by the USB device model, which is defined - * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C - * that need these: - * - * - the master/host side Linux-USB kernel driver API; - * - the "usbfs" user space API; and - * - (eventually) a Linux "gadget" slave/device side driver API. - * - * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems - * act either as a USB master/host or as a USB slave/device. That means - * the master and slave side APIs will benefit from working well together. - */ - - #ifndef __LINUX_USB_CH9_H - #define __LINUX_USB_CH9_H - - #include /* __u8 etc */ - - /*-------------------------------------------------------------------------*/ - - /* CONTROL REQUEST SUPPORT */ - - /* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ - #define USB_DIR_OUT 0 /* to device */ - #define USB_DIR_IN 0x80 /* to host */ - - /* - * USB types, the second of three bRequestType fields - */ - #define USB_TYPE_MASK (0x03 << 5) - #define USB_TYPE_STANDARD (0x00 << 5) - #define USB_TYPE_CLASS (0x01 << 5) - #define USB_TYPE_VENDOR (0x02 << 5) - #define USB_TYPE_RESERVED (0x03 << 5) - - /* - * USB recipients, the third of three bRequestType fields - */ - #define USB_RECIP_MASK 0x1f - #define USB_RECIP_DEVICE 0x00 - #define USB_RECIP_INTERFACE 0x01 - #define USB_RECIP_ENDPOINT 0x02 - #define USB_RECIP_OTHER 0x03 - - /* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ - #define USB_REQ_GET_STATUS 0x00 - #define USB_REQ_CLEAR_FEATURE 0x01 - #define USB_REQ_SET_FEATURE 0x03 - #define USB_REQ_SET_ADDRESS 0x05 - #define USB_REQ_GET_DESCRIPTOR 0x06 - #define USB_REQ_SET_DESCRIPTOR 0x07 - #define USB_REQ_GET_CONFIGURATION 0x08 - #define USB_REQ_SET_CONFIGURATION 0x09 - #define USB_REQ_GET_INTERFACE 0x0A - #define USB_REQ_SET_INTERFACE 0x0B - #define USB_REQ_SYNCH_FRAME 0x0C - - /* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) - */ - #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ - #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ - #define USB_DEVICE_TEST_MODE 2 /* (high speed only) */ - #define USB_DEVICE_B_HNP_ENABLE 3 /* dev may initiate HNP */ - #define USB_DEVICE_A_HNP_SUPPORT 4 /* RH port supports HNP */ - #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* other RH port does */ - #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - - #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - - - /** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ - struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - } __attribute__ ((packed)); - - /*-------------------------------------------------------------------------*/ - - /* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". But when exposed through Linux-USB APIs, - * they've been converted to cpu byte order. - */ - - /* - * Descriptor types ... USB 2.0 spec table 9.5 - */ - #define USB_DT_DEVICE 0x01 - #define USB_DT_CONFIG 0x02 - #define USB_DT_STRING 0x03 - #define USB_DT_INTERFACE 0x04 - #define USB_DT_ENDPOINT 0x05 - #define USB_DT_DEVICE_QUALIFIER 0x06 - #define USB_DT_OTHER_SPEED_CONFIG 0x07 - #define USB_DT_INTERFACE_POWER 0x08 - /* these are from a minor usb 2.0 revision (ECN) */ - #define USB_DT_OTG 0x09 - #define USB_DT_DEBUG 0x0a - #define USB_DT_INTERFACE_ASSOCIATION 0x0b - - /* conventional codes for class-specific descriptors */ - #define USB_DT_CS_DEVICE 0x21 - #define USB_DT_CS_CONFIG 0x22 - #define USB_DT_CS_STRING 0x23 - #define USB_DT_CS_INTERFACE 0x24 - #define USB_DT_CS_ENDPOINT 0x25 - - /* All standard descriptors have these 2 fields at the beginning */ - struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; - } __attribute__ ((packed)); - - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_DEVICE: Device descriptor */ - struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u16 idVendor; - __u16 idProduct; - __u16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; - } __attribute__ ((packed)); - - #define USB_DT_DEVICE_SIZE 18 - - - /* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ - #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ - #define USB_CLASS_AUDIO 1 - #define USB_CLASS_COMM 2 - #define USB_CLASS_HID 3 - #define USB_CLASS_PHYSICAL 5 - #define USB_CLASS_STILL_IMAGE 6 - #define USB_CLASS_PRINTER 7 - #define USB_CLASS_MASS_STORAGE 8 - #define USB_CLASS_HUB 9 - #define USB_CLASS_CDC_DATA 0x0a - #define USB_CLASS_CSCID 0x0b /* chip+ smart card */ - #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ - #define USB_CLASS_VIDEO 0x0e - #define USB_CLASS_APP_SPEC 0xfe - #define USB_CLASS_VENDOR_SPEC 0xff - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ - struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; - } __attribute__ ((packed)); - - #define USB_DT_CONFIG_SIZE 9 - - /* from config descriptor bmAttributes */ - #define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ - #define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ - #define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_STRING: String descriptor */ - struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u16 wData[1]; /* UTF-16LE encoded */ - } __attribute__ ((packed)); - - /* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_INTERFACE: Interface descriptor */ - struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; - } __attribute__ ((packed)); - - #define USB_DT_INTERFACE_SIZE 9 - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_ENDPOINT: Endpoint descriptor */ - struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __u16 wMaxPacketSize; - __u8 bInterval; - - // NOTE: these two are _only_ in audio endpoints. - // use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. - __u8 bRefresh; - __u8 bSynchAddress; - } __attribute__ ((packed)); - - #define USB_DT_ENDPOINT_SIZE 7 - #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - - /* - * Endpoints - */ - #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ - #define USB_ENDPOINT_DIR_MASK 0x80 - - #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ - #define USB_ENDPOINT_XFER_CONTROL 0 - #define USB_ENDPOINT_XFER_ISOC 1 - #define USB_ENDPOINT_XFER_BULK 2 - #define USB_ENDPOINT_XFER_INT 3 - - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ - struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; - } __attribute__ ((packed)); - - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_OTG (from OTG 1.0a supplement) */ - struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ - } __attribute__ ((packed)); - - /* from usb_otg_descriptor.bmAttributes */ - #define USB_OTG_SRP (1 << 0) - #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ - struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; - }; - - /*-------------------------------------------------------------------------*/ - - /* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ - struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; - } __attribute__ ((packed)); - - - /*-------------------------------------------------------------------------*/ - - /* USB 2.0 defines three speeds, here's how Linux identifies them */ - - enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH /* usb 2.0 */ - }; - - enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* the chapter 9 device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - */ - }; - - #endif /* __LINUX_USB_CH9_H */ - +/* + * This file holds USB constants and structures that are needed for USB + * device APIs. These are used by the USB device model, which is defined + * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C + * that need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - (eventually) a Linux "gadget" slave/device side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs will benefit from working well together. + */ + + #ifndef __LINUX_USB_CH9_H + #define __LINUX_USB_CH9_H + + #include /* __u8 etc */ + + /*-------------------------------------------------------------------------*/ + + /* CONTROL REQUEST SUPPORT */ + + /* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ + #define USB_DIR_OUT 0 /* to device */ + #define USB_DIR_IN 0x80 /* to host */ + + /* + * USB types, the second of three bRequestType fields + */ + #define USB_TYPE_MASK (0x03 << 5) + #define USB_TYPE_STANDARD (0x00 << 5) + #define USB_TYPE_CLASS (0x01 << 5) + #define USB_TYPE_VENDOR (0x02 << 5) + #define USB_TYPE_RESERVED (0x03 << 5) + + /* + * USB recipients, the third of three bRequestType fields + */ + #define USB_RECIP_MASK 0x1f + #define USB_RECIP_DEVICE 0x00 + #define USB_RECIP_INTERFACE 0x01 + #define USB_RECIP_ENDPOINT 0x02 + #define USB_RECIP_OTHER 0x03 + + /* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ + #define USB_REQ_GET_STATUS 0x00 + #define USB_REQ_CLEAR_FEATURE 0x01 + #define USB_REQ_SET_FEATURE 0x03 + #define USB_REQ_SET_ADDRESS 0x05 + #define USB_REQ_GET_DESCRIPTOR 0x06 + #define USB_REQ_SET_DESCRIPTOR 0x07 + #define USB_REQ_GET_CONFIGURATION 0x08 + #define USB_REQ_SET_CONFIGURATION 0x09 + #define USB_REQ_GET_INTERFACE 0x0A + #define USB_REQ_SET_INTERFACE 0x0B + #define USB_REQ_SYNCH_FRAME 0x0C + + /* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) + */ + #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ + #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ + #define USB_DEVICE_TEST_MODE 2 /* (high speed only) */ + #define USB_DEVICE_B_HNP_ENABLE 3 /* dev may initiate HNP */ + #define USB_DEVICE_A_HNP_SUPPORT 4 /* RH port supports HNP */ + #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* other RH port does */ + #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + + #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + + + /** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ + struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __u16 wValue; + __u16 wIndex; + __u16 wLength; + } __attribute__ ((packed)); + + /*-------------------------------------------------------------------------*/ + + /* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". But when exposed through Linux-USB APIs, + * they've been converted to cpu byte order. + */ + + /* + * Descriptor types ... USB 2.0 spec table 9.5 + */ + #define USB_DT_DEVICE 0x01 + #define USB_DT_CONFIG 0x02 + #define USB_DT_STRING 0x03 + #define USB_DT_INTERFACE 0x04 + #define USB_DT_ENDPOINT 0x05 + #define USB_DT_DEVICE_QUALIFIER 0x06 + #define USB_DT_OTHER_SPEED_CONFIG 0x07 + #define USB_DT_INTERFACE_POWER 0x08 + /* these are from a minor usb 2.0 revision (ECN) */ + #define USB_DT_OTG 0x09 + #define USB_DT_DEBUG 0x0a + #define USB_DT_INTERFACE_ASSOCIATION 0x0b + + /* conventional codes for class-specific descriptors */ + #define USB_DT_CS_DEVICE 0x21 + #define USB_DT_CS_CONFIG 0x22 + #define USB_DT_CS_STRING 0x23 + #define USB_DT_CS_INTERFACE 0x24 + #define USB_DT_CS_ENDPOINT 0x25 + + /* All standard descriptors have these 2 fields at the beginning */ + struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; + } __attribute__ ((packed)); + + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_DEVICE: Device descriptor */ + struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u16 idVendor; + __u16 idProduct; + __u16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; + } __attribute__ ((packed)); + + #define USB_DT_DEVICE_SIZE 18 + + + /* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ + #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ + #define USB_CLASS_AUDIO 1 + #define USB_CLASS_COMM 2 + #define USB_CLASS_HID 3 + #define USB_CLASS_PHYSICAL 5 + #define USB_CLASS_STILL_IMAGE 6 + #define USB_CLASS_PRINTER 7 + #define USB_CLASS_MASS_STORAGE 8 + #define USB_CLASS_HUB 9 + #define USB_CLASS_CDC_DATA 0x0a + #define USB_CLASS_CSCID 0x0b /* chip+ smart card */ + #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ + #define USB_CLASS_VIDEO 0x0e + #define USB_CLASS_APP_SPEC 0xfe + #define USB_CLASS_VENDOR_SPEC 0xff + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ + struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; + } __attribute__ ((packed)); + + #define USB_DT_CONFIG_SIZE 9 + + /* from config descriptor bmAttributes */ + #define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ + #define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ + #define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_STRING: String descriptor */ + struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u16 wData[1]; /* UTF-16LE encoded */ + } __attribute__ ((packed)); + + /* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_INTERFACE: Interface descriptor */ + struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; + } __attribute__ ((packed)); + + #define USB_DT_INTERFACE_SIZE 9 + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_ENDPOINT: Endpoint descriptor */ + struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __u16 wMaxPacketSize; + __u8 bInterval; + + // NOTE: these two are _only_ in audio endpoints. + // use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. + __u8 bRefresh; + __u8 bSynchAddress; + } __attribute__ ((packed)); + + #define USB_DT_ENDPOINT_SIZE 7 + #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + + /* + * Endpoints + */ + #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ + #define USB_ENDPOINT_DIR_MASK 0x80 + + #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ + #define USB_ENDPOINT_XFER_CONTROL 0 + #define USB_ENDPOINT_XFER_ISOC 1 + #define USB_ENDPOINT_XFER_BULK 2 + #define USB_ENDPOINT_XFER_INT 3 + + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ + struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; + } __attribute__ ((packed)); + + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_OTG (from OTG 1.0a supplement) */ + struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ + } __attribute__ ((packed)); + + /* from usb_otg_descriptor.bmAttributes */ + #define USB_OTG_SRP (1 << 0) + #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ + struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; + }; + + /*-------------------------------------------------------------------------*/ + + /* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ + struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; + } __attribute__ ((packed)); + + + /*-------------------------------------------------------------------------*/ + + /* USB 2.0 defines three speeds, here's how Linux identifies them */ + + enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH /* usb 2.0 */ + }; + + enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* the chapter 9 device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + */ + }; + + #endif /* __LINUX_USB_CH9_H */ + -- cgit v0.12