diff options
Diffstat (limited to 'linux-2.4.x/fs/jffs2/wbuf.c')
| -rw-r--r-- | linux-2.4.x/fs/jffs2/wbuf.c | 1372 |
1 files changed, 1372 insertions, 0 deletions
diff --git a/linux-2.4.x/fs/jffs2/wbuf.c b/linux-2.4.x/fs/jffs2/wbuf.c new file mode 100644 index 0000000..2324229 --- /dev/null +++ b/linux-2.4.x/fs/jffs2/wbuf.c @@ -0,0 +1,1372 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2001-2003 Red Hat, Inc. + * Copyright (C) 2004 Thomas Gleixner <tglx@linutronix.de> + * + * Created by David Woodhouse <dwmw2@infradead.org> + * Modified debugged and enhanced by Thomas Gleixner <tglx@linutronix.de> + * + * For licensing information, see the file 'LICENCE' in this directory. + * + * $Id: wbuf.c,v 1.110 2006/02/09 16:13:35 dwmw2 Exp $ + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mtd/mtd.h> +#include <linux/crc32.h> +#include <linux/mtd/nand.h> +#include <linux/jiffies.h> + +#include "nodelist.h" + +/* For testing write failures */ +#undef BREAKME +#undef BREAKMEHEADER + +#ifdef BREAKME +static unsigned char *brokenbuf; +#endif + +#define PAGE_DIV(x) ( ((unsigned long)(x) / (unsigned long)(c->wbuf_pagesize)) * (unsigned long)(c->wbuf_pagesize) ) +#define PAGE_MOD(x) ( (unsigned long)(x) % (unsigned long)(c->wbuf_pagesize) ) + +/* max. erase failures before we mark a block bad */ +#define MAX_ERASE_FAILURES 2 + +struct jffs2_inodirty { + uint32_t ino; + struct jffs2_inodirty *next; +}; + +static struct jffs2_inodirty inodirty_nomem; + +static int jffs2_wbuf_pending_for_ino(struct jffs2_sb_info *c, uint32_t ino) +{ + struct jffs2_inodirty *this = c->wbuf_inodes; + + /* If a malloc failed, consider _everything_ dirty */ + if (this == &inodirty_nomem) + return 1; + + /* If ino == 0, _any_ non-GC writes mean 'yes' */ + if (this && !ino) + return 1; + + /* Look to see if the inode in question is pending in the wbuf */ + while (this) { + if (this->ino == ino) + return 1; + this = this->next; + } + return 0; +} + +static void jffs2_clear_wbuf_ino_list(struct jffs2_sb_info *c) +{ + struct jffs2_inodirty *this; + + this = c->wbuf_inodes; + + if (this != &inodirty_nomem) { + while (this) { + struct jffs2_inodirty *next = this->next; + kfree(this); + this = next; + } + } + c->wbuf_inodes = NULL; +} + +static void jffs2_wbuf_dirties_inode(struct jffs2_sb_info *c, uint32_t ino) +{ + struct jffs2_inodirty *new; + + /* Mark the superblock dirty so that kupdated will flush... */ + jffs2_erase_pending_trigger(c); + + if (jffs2_wbuf_pending_for_ino(c, ino)) + return; + + new = kmalloc(sizeof(*new), GFP_KERNEL); + if (!new) { + D1(printk(KERN_DEBUG "No memory to allocate inodirty. Fallback to all considered dirty\n")); + jffs2_clear_wbuf_ino_list(c); + c->wbuf_inodes = &inodirty_nomem; + return; + } + new->ino = ino; + new->next = c->wbuf_inodes; + c->wbuf_inodes = new; + return; +} + +static inline void jffs2_refile_wbuf_blocks(struct jffs2_sb_info *c) +{ + struct list_head *this, *next; + static int n; + + if (list_empty(&c->erasable_pending_wbuf_list)) + return; + + list_for_each_safe(this, next, &c->erasable_pending_wbuf_list) { + struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list); + + D1(printk(KERN_DEBUG "Removing eraseblock at 0x%08x from erasable_pending_wbuf_list...\n", jeb->offset)); + list_del(this); + if ((jiffies + (n++)) & 127) { + /* Most of the time, we just erase it immediately. Otherwise we + spend ages scanning it on mount, etc. */ + D1(printk(KERN_DEBUG "...and adding to erase_pending_list\n")); + list_add_tail(&jeb->list, &c->erase_pending_list); + c->nr_erasing_blocks++; + jffs2_erase_pending_trigger(c); + } else { + /* Sometimes, however, we leave it elsewhere so it doesn't get + immediately reused, and we spread the load a bit. */ + D1(printk(KERN_DEBUG "...and adding to erasable_list\n")); + list_add_tail(&jeb->list, &c->erasable_list); + } + } +} + +#define REFILE_NOTEMPTY 0 +#define REFILE_ANYWAY 1 + +static void jffs2_block_refile(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, int allow_empty) +{ + D1(printk("About to refile bad block at %08x\n", jeb->offset)); + + /* File the existing block on the bad_used_list.... */ + if (c->nextblock == jeb) + c->nextblock = NULL; + else { /* Not sure this should ever happen... need more coffee */ + list_del(&jeb->list); + jffs2_remove_from_hash_table(c, jeb, 1); + } + if (jeb->first_node) { + D1(printk("Refiling block at %08x to bad_used_list\n", jeb->offset)); + list_add(&jeb->list, &c->bad_used_list); + } else { + BUG_ON(allow_empty == REFILE_NOTEMPTY); + /* It has to have had some nodes or we couldn't be here */ + D1(printk("Refiling block at %08x to erase_pending_list\n", jeb->offset)); + list_add(&jeb->list, &c->erase_pending_list); + c->nr_erasing_blocks++; + jffs2_erase_pending_trigger(c); + } + + /* Adjust its size counts accordingly */ + c->wasted_size += jeb->free_size; + c->free_size -= jeb->free_size; + jeb->wasted_size += jeb->free_size; + jeb->free_size = 0; + + jffs2_dbg_dump_block_lists_nolock(c); + jffs2_dbg_acct_sanity_check_nolock(c,jeb); + jffs2_dbg_acct_paranoia_check_nolock(c, jeb); +} + +/* Recover from failure to write wbuf. Recover the nodes up to the + * wbuf, not the one which we were starting to try to write. */ + +static void jffs2_wbuf_recover(struct jffs2_sb_info *c) +{ + struct jffs2_eraseblock *jeb, *new_jeb; + struct jffs2_raw_node_ref **first_raw, **raw; + size_t retlen; + int ret; + unsigned char *buf; + uint32_t start, end, ofs, len; + + spin_lock(&c->erase_completion_lock); + + jeb = c->blocks[c->wbuf_ofs / c->sector_size]; + + jffs2_block_refile(c, jeb, REFILE_NOTEMPTY); + + /* Find the first node to be recovered, by skipping over every + node which ends before the wbuf starts, or which is obsolete. */ + first_raw = &jeb->first_node; + while (*first_raw && + (ref_obsolete(*first_raw) || + (ref_offset(*first_raw)+ref_totlen(c, jeb, *first_raw)) < c->wbuf_ofs)) { + D1(printk(KERN_DEBUG "Skipping node at 0x%08x(%d)-0x%08x which is either before 0x%08x or obsolete\n", + ref_offset(*first_raw), ref_flags(*first_raw), + (ref_offset(*first_raw) + ref_totlen(c, jeb, *first_raw)), + c->wbuf_ofs)); + first_raw = &(*first_raw)->next_phys; + } + + if (!*first_raw) { + /* All nodes were obsolete. Nothing to recover. */ + D1(printk(KERN_DEBUG "No non-obsolete nodes to be recovered. Just filing block bad\n")); + spin_unlock(&c->erase_completion_lock); + return; + } + + start = ref_offset(*first_raw); + end = ref_offset(*first_raw) + ref_totlen(c, jeb, *first_raw); + + /* Find the last node to be recovered */ + raw = first_raw; + while ((*raw)) { + if (!ref_obsolete(*raw)) + end = ref_offset(*raw) + ref_totlen(c, jeb, *raw); + + raw = &(*raw)->next_phys; + } + spin_unlock(&c->erase_completion_lock); + + D1(printk(KERN_DEBUG "wbuf recover %08x-%08x\n", start, end)); + + buf = NULL; + if (start < c->wbuf_ofs) { + /* First affected node was already partially written. + * Attempt to reread the old data into our buffer. */ + + buf = kmalloc(end - start, GFP_KERNEL); + if (!buf) { + printk(KERN_CRIT "Malloc failure in wbuf recovery. Data loss ensues.\n"); + + goto read_failed; + } + + /* Do the read... */ + if (jffs2_ebh_oob(c)) + ret = c->mtd->read_ecc(c->mtd, start, c->wbuf_ofs - start, &retlen, buf, NULL, c->oobinfo); + else + ret = c->mtd->read(c->mtd, start, c->wbuf_ofs - start, &retlen, buf); + + if (ret == -EBADMSG && retlen == c->wbuf_ofs - start) { + /* ECC recovered */ + ret = 0; + } + if (ret || retlen != c->wbuf_ofs - start) { + printk(KERN_CRIT "Old data are already lost in wbuf recovery. Data loss ensues.\n"); + + kfree(buf); + buf = NULL; + read_failed: + first_raw = &(*first_raw)->next_phys; + /* If this was the only node to be recovered, give up */ + if (!(*first_raw)) + return; + + /* It wasn't. Go on and try to recover nodes complete in the wbuf */ + start = ref_offset(*first_raw); + } else { + /* Read succeeded. Copy the remaining data from the wbuf */ + memcpy(buf + (c->wbuf_ofs - start), c->wbuf, end - c->wbuf_ofs); + } + } + /* OK... we're to rewrite (end-start) bytes of data from first_raw onwards. + Either 'buf' contains the data, or we find it in the wbuf */ + + + /* ... and get an allocation of space from a shiny new block instead */ + ret = jffs2_reserve_space_gc(c, end-start, &ofs, &len, JFFS2_SUMMARY_NOSUM_SIZE); + if (ret) { + printk(KERN_WARNING "Failed to allocate space for wbuf recovery. Data loss ensues.\n"); + kfree(buf); + return; + } + if (end-start >= c->wbuf_pagesize) { + /* Need to do another write immediately, but it's possible + that this is just because the wbuf itself is completely + full, and there's nothing earlier read back from the + flash. Hence 'buf' isn't necessarily what we're writing + from. */ + unsigned char *rewrite_buf = buf?:c->wbuf; + uint32_t towrite = (end-start) - ((end-start)%c->wbuf_pagesize); + + D1(printk(KERN_DEBUG "Write 0x%x bytes at 0x%08x in wbuf recover\n", + towrite, ofs)); + +#ifdef BREAKMEHEADER + static int breakme; + if (breakme++ == 20) { + printk(KERN_NOTICE "Faking write error at 0x%08x\n", ofs); + breakme = 0; + c->mtd->write_ecc(c->mtd, ofs, towrite, &retlen, + brokenbuf, NULL, c->oobinfo); + ret = -EIO; + } else +#endif + if (jffs2_ebh_oob(c)) + ret = c->mtd->write_ecc(c->mtd, ofs, towrite, &retlen, + rewrite_buf, NULL, c->oobinfo); + else + ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, rewrite_buf); + + if (ret || retlen != towrite) { + /* Argh. We tried. Really we did. */ + printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n"); + kfree(buf); + + if (retlen) { + struct jffs2_raw_node_ref *raw2; + + raw2 = jffs2_alloc_raw_node_ref(); + if (!raw2) + return; + + raw2->flash_offset = ofs | REF_OBSOLETE; + raw2->__totlen = ref_totlen(c, jeb, *first_raw); + raw2->next_phys = NULL; + raw2->next_in_ino = NULL; + + jffs2_add_physical_node_ref(c, raw2); + } + return; + } + printk(KERN_NOTICE "Recovery of wbuf succeeded to %08x\n", ofs); + + c->wbuf_len = (end - start) - towrite; + c->wbuf_ofs = ofs + towrite; + memmove(c->wbuf, rewrite_buf + towrite, c->wbuf_len); + /* Don't muck about with c->wbuf_inodes. False positives are harmless. */ + if (buf) + kfree(buf); + } else { + /* OK, now we're left with the dregs in whichever buffer we're using */ + if (buf) { + memcpy(c->wbuf, buf, end-start); + kfree(buf); + } else { + memmove(c->wbuf, c->wbuf + (start - c->wbuf_ofs), end - start); + } + c->wbuf_ofs = ofs; + c->wbuf_len = end - start; + } + + /* Now sort out the jffs2_raw_node_refs, moving them from the old to the next block */ + new_jeb = c->blocks[ofs / c->sector_size]; + + spin_lock(&c->erase_completion_lock); + if (new_jeb->first_node) { + /* Odd, but possible with ST flash later maybe */ + new_jeb->last_node->next_phys = *first_raw; + } else { + new_jeb->first_node = *first_raw; + } + + raw = first_raw; + while (*raw) { + uint32_t rawlen = ref_totlen(c, jeb, *raw); + + D1(printk(KERN_DEBUG "Refiling block of %08x at %08x(%d) to %08x\n", + rawlen, ref_offset(*raw), ref_flags(*raw), ofs)); + + if (ref_obsolete(*raw)) { + /* Shouldn't really happen much */ + new_jeb->dirty_size += rawlen; + new_jeb->free_size -= rawlen; + c->dirty_size += rawlen; + } else { + new_jeb->used_size += rawlen; + new_jeb->free_size -= rawlen; + jeb->dirty_size += rawlen; + jeb->used_size -= rawlen; + c->dirty_size += rawlen; + } + c->free_size -= rawlen; + (*raw)->flash_offset = ofs | ref_flags(*raw); + ofs += rawlen; + new_jeb->last_node = *raw; + + raw = &(*raw)->next_phys; + } + + /* Fix up the original jeb now it's on the bad_list */ + *first_raw = NULL; + if (first_raw == &jeb->first_node) { + jeb->last_node = NULL; + D1(printk(KERN_DEBUG "Failing block at %08x is now empty. Moving to erase_pending_list\n", jeb->offset)); + list_del(&jeb->list); + list_add(&jeb->list, &c->erase_pending_list); + c->nr_erasing_blocks++; + jffs2_erase_pending_trigger(c); + } + else + jeb->last_node = container_of(first_raw, struct jffs2_raw_node_ref, next_phys); + + jffs2_dbg_acct_sanity_check_nolock(c, jeb); + jffs2_dbg_acct_paranoia_check_nolock(c, jeb); + + jffs2_dbg_acct_sanity_check_nolock(c, new_jeb); + jffs2_dbg_acct_paranoia_check_nolock(c, new_jeb); + + spin_unlock(&c->erase_completion_lock); + + D1(printk(KERN_DEBUG "wbuf recovery completed OK\n")); +} + +/* Meaning of pad argument: + 0: Do not pad. Probably pointless - we only ever use this when we can't pad anyway. + 1: Pad, do not adjust nextblock free_size + 2: Pad, adjust nextblock free_size +*/ +#define NOPAD 0 +#define PAD_NOACCOUNT 1 +#define PAD_ACCOUNTING 2 + +static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad) +{ + int ret; + size_t retlen; + + /* Nothing to do if not write-buffering the flash. In particular, we shouldn't + del_timer() the timer we never initialised. */ + if (!jffs2_is_writebuffered(c)) + return 0; + + if (!down_trylock(&c->alloc_sem)) { + up(&c->alloc_sem); + printk(KERN_CRIT "jffs2_flush_wbuf() called with alloc_sem not locked!\n"); + BUG(); + } + + if (!c->wbuf_len) /* already checked c->wbuf above */ + return 0; + + /* claim remaining space on the page + this happens, if we have a change to a new block, + or if fsync forces us to flush the writebuffer. + if we have a switch to next page, we will not have + enough remaining space for this. + */ + if (pad ) { + c->wbuf_len = PAD(c->wbuf_len); + + /* Pad with JFFS2_DIRTY_BITMASK initially. this helps out ECC'd NOR + with 8 byte page size */ + memset(c->wbuf + c->wbuf_len, 0, c->wbuf_pagesize - c->wbuf_len); + + if ( c->wbuf_len + sizeof(struct jffs2_unknown_node) < c->wbuf_pagesize) { + struct jffs2_unknown_node *padnode = (void *)(c->wbuf + c->wbuf_len); + padnode->magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); + padnode->nodetype = cpu_to_je16(JFFS2_NODETYPE_PADDING); + padnode->totlen = cpu_to_je32(c->wbuf_pagesize - c->wbuf_len); + padnode->hdr_crc = cpu_to_je32(crc32(0, padnode, sizeof(*padnode)-4)); + } + } + /* else jffs2_flash_writev has actually filled in the rest of the + buffer for us, and will deal with the node refs etc. later. */ + +#ifdef BREAKME + static int breakme; + if (breakme++ == 20) { + printk(KERN_NOTICE "Faking write error at 0x%08x\n", c->wbuf_ofs); + breakme = 0; + c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, + &retlen, brokenbuf, NULL, c->oobinfo); + ret = -EIO; + } else +#endif + + if (jffs2_ebh_oob(c)) + ret = c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf, NULL, c->oobinfo); + else + ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf); + + if (ret || retlen != c->wbuf_pagesize) { + if (ret) + printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret); + else { + printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", + retlen, c->wbuf_pagesize); + ret = -EIO; + } + + jffs2_wbuf_recover(c); + + return ret; + } + + spin_lock(&c->erase_completion_lock); + + /* Adjust free size of the block if we padded. */ + if (pad) { + struct jffs2_eraseblock *jeb; + + jeb = c->blocks[c->wbuf_ofs / c->sector_size]; + + D1(printk(KERN_DEBUG "jffs2_flush_wbuf() adjusting free_size of %sblock at %08x\n", + (jeb==c->nextblock)?"next":"", jeb->offset)); + + /* wbuf_pagesize - wbuf_len is the amount of space that's to be + padded. If there is less free space in the block than that, + something screwed up */ + if (jeb->free_size < (c->wbuf_pagesize - c->wbuf_len)) { + printk(KERN_CRIT "jffs2_flush_wbuf(): Accounting error. wbuf at 0x%08x has 0x%03x bytes, 0x%03x left.\n", + c->wbuf_ofs, c->wbuf_len, c->wbuf_pagesize-c->wbuf_len); + printk(KERN_CRIT "jffs2_flush_wbuf(): But free_size for block at 0x%08x is only 0x%08x\n", + jeb->offset, jeb->free_size); + BUG(); + } + jeb->free_size -= (c->wbuf_pagesize - c->wbuf_len); + c->free_size -= (c->wbuf_pagesize - c->wbuf_len); + jeb->wasted_size += (c->wbuf_pagesize - c->wbuf_len); + c->wasted_size += (c->wbuf_pagesize - c->wbuf_len); + } + + /* Stick any now-obsoleted blocks on the erase_pending_list */ + jffs2_refile_wbuf_blocks(c); + jffs2_clear_wbuf_ino_list(c); + spin_unlock(&c->erase_completion_lock); + + memset(c->wbuf,0xff,c->wbuf_pagesize); + /* adjust write buffer offset, else we get a non contiguous write bug */ + c->wbuf_ofs += c->wbuf_pagesize; + c->wbuf_len = 0; + return 0; +} + +/* Trigger garbage collection to flush the write-buffer. + If ino arg is zero, do it if _any_ real (i.e. not GC) writes are + outstanding. If ino arg non-zero, do it only if a write for the + given inode is outstanding. */ +int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino) +{ + uint32_t old_wbuf_ofs; + uint32_t old_wbuf_len; + int ret = 0; + + D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() called for ino #%u...\n", ino)); + + if (!c->wbuf) + return 0; + + down(&c->alloc_sem); + if (!jffs2_wbuf_pending_for_ino(c, ino)) { + D1(printk(KERN_DEBUG "Ino #%d not pending in wbuf. Returning\n", ino)); + up(&c->alloc_sem); + return 0; + } + + old_wbuf_ofs = c->wbuf_ofs; + old_wbuf_len = c->wbuf_len; + + if (c->unchecked_size) { + /* GC won't make any progress for a while */ + D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() padding. Not finished checking\n")); + down_write(&c->wbuf_sem); + ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING); + /* retry flushing wbuf in case jffs2_wbuf_recover + left some data in the wbuf */ + if (ret) + ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING); + up_write(&c->wbuf_sem); + } else while (old_wbuf_len && + old_wbuf_ofs == c->wbuf_ofs) { + + up(&c->alloc_sem); + + D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() calls gc pass\n")); + + ret = jffs2_garbage_collect_pass(c); + if (ret) { + /* GC failed. Flush it with padding instead */ + down(&c->alloc_sem); + down_write(&c->wbuf_sem); + ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING); + /* retry flushing wbuf in case jffs2_wbuf_recover + left some data in the wbuf */ + if (ret) + ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING); + up_write(&c->wbuf_sem); + break; + } + down(&c->alloc_sem); + } + + D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() ends...\n")); + + up(&c->alloc_sem); + return ret; +} + +/* Pad write-buffer to end and write it, wasting space. */ +int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c) +{ + int ret; + + if (!c->wbuf) + return 0; + + down_write(&c->wbuf_sem); + ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT); + /* retry - maybe wbuf recover left some data in wbuf. */ + if (ret) + ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT); + up_write(&c->wbuf_sem); + + return ret; +} +int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsigned long count, loff_t to, size_t *retlen, uint32_t ino) +{ + struct kvec outvecs[3]; + uint32_t totlen = 0; + uint32_t split_ofs = 0; + uint32_t old_totlen; + int ret, splitvec = -1; + int invec, outvec; + size_t wbuf_retlen; + unsigned char *wbuf_ptr; + size_t donelen = 0; + uint32_t outvec_to = to; + + /* If not NAND flash, don't bother */ + if (!jffs2_is_writebuffered(c)) + return jffs2_flash_direct_writev(c, invecs, count, to, retlen); + + down_write(&c->wbuf_sem); + + /* If wbuf_ofs is not initialized, set it to target address */ + if (c->wbuf_ofs == 0xFFFFFFFF) { + c->wbuf_ofs = PAGE_DIV(to); + c->wbuf_len = PAGE_MOD(to); + memset(c->wbuf,0xff,c->wbuf_pagesize); + } + + /* Fixup the wbuf if we are moving to a new eraseblock. The checks below + fail for ECC'd NOR because cleanmarker == 16, so a block starts at + xxx0010. */ + if (jffs2_nor_ecc(c) || jffs2_nor_wbuf_flash(c)) { + if (((c->wbuf_ofs % c->sector_size) == 0) && !c->wbuf_len) { + c->wbuf_ofs = PAGE_DIV(to); + c->wbuf_len = PAGE_MOD(to); + memset(c->wbuf,0xff,c->wbuf_pagesize); + } + } + + /* Sanity checks on target address. + It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs), + and it's permitted to write at the beginning of a new + erase block. Anything else, and you die. + New block starts at xxx000c (0-b = block header) + */ + if (SECTOR_ADDR(to) != SECTOR_ADDR(c->wbuf_ofs)) { + /* It's a write to a new block */ + if (c->wbuf_len) { + D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx causes flush of wbuf at 0x%08x\n", (unsigned long)to, c->wbuf_ofs)); + ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT); + if (ret) { + /* the underlying layer has to check wbuf_len to do the cleanup */ + D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret)); + *retlen = 0; + goto exit; + } + } + /* set pointer to new block */ + c->wbuf_ofs = PAGE_DIV(to); + c->wbuf_len = PAGE_MOD(to); + } + + if (to != PAD(c->wbuf_ofs + c->wbuf_len)) { + /* We're not writing immediately after the writebuffer. Bad. */ + printk(KERN_CRIT "jffs2_flash_writev(): Non-contiguous write to %08lx\n", (unsigned long)to); + if (c->wbuf_len) + printk(KERN_CRIT "wbuf was previously %08x-%08x\n", + c->wbuf_ofs, c->wbuf_ofs+c->wbuf_len); + BUG(); + } + + /* Note outvecs[3] above. We know count is never greater than 2 */ + if (count > 2) { + printk(KERN_CRIT "jffs2_flash_writev(): count is %ld\n", count); + BUG(); + } + + invec = 0; + outvec = 0; + + /* Fill writebuffer first, if already in use */ + if (c->wbuf_len) { + uint32_t invec_ofs = 0; + + /* adjust alignment offset */ + if (c->wbuf_len != PAGE_MOD(to)) { + c->wbuf_len = PAGE_MOD(to); + /* take care of alignment to next page */ + if (!c->wbuf_len) + c->wbuf_len = c->wbuf_pagesize; + } + + while(c->wbuf_len < c->wbuf_pagesize) { + uint32_t thislen; + + if (invec == count) + goto alldone; + + thislen = c->wbuf_pagesize - c->wbuf_len; + + if (thislen >= invecs[invec].iov_len) + thislen = invecs[invec].iov_len; + + invec_ofs = thislen; + + memcpy(c->wbuf + c->wbuf_len, invecs[invec].iov_base, thislen); + c->wbuf_len += thislen; + donelen += thislen; + /* Get next invec, if actual did not fill the buffer */ + if (c->wbuf_len < c->wbuf_pagesize) + invec++; + } + + /* write buffer is full, flush buffer */ + ret = __jffs2_flush_wbuf(c, NOPAD); + if (ret) { + /* the underlying layer has to check wbuf_len to do the cleanup */ + D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret)); + /* Retlen zero to make sure our caller doesn't mark the space dirty. + We've already done everything that's necessary */ + *retlen = 0; + goto exit; + } + outvec_to += donelen; + c->wbuf_ofs = outvec_to; + + /* All invecs done ? */ + if (invec == count) + goto alldone; + + /* Set up the first outvec, containing the remainder of the + invec we partially used */ + if (invecs[invec].iov_len > invec_ofs) { + outvecs[0].iov_base = invecs[invec].iov_base+invec_ofs; + totlen = outvecs[0].iov_len = invecs[invec].iov_len-invec_ofs; + if (totlen > c->wbuf_pagesize) { + splitvec = outvec; + split_ofs = outvecs[0].iov_len - PAGE_MOD(totlen); + } + outvec++; + } + invec++; + } + + /* OK, now we've flushed the wbuf and the start of the bits + we have been asked to write, now to write the rest.... */ + + /* totlen holds the amount of data still to be written */ + old_totlen = totlen; + for ( ; invec < count; invec++,outvec++ ) { + outvecs[outvec].iov_base = invecs[invec].iov_base; + totlen += outvecs[outvec].iov_len = invecs[invec].iov_len; + if (PAGE_DIV(totlen) != PAGE_DIV(old_totlen)) { + splitvec = outvec; + split_ofs = outvecs[outvec].iov_len - PAGE_MOD(totlen); + old_totlen = totlen; + } + } + + /* Now the outvecs array holds all the remaining data to write */ + /* Up to splitvec,split_ofs is to be written immediately. The rest + goes into the (now-empty) wbuf */ + + if (splitvec != -1) { + uint32_t remainder; + + remainder = outvecs[splitvec].iov_len - split_ofs; + outvecs[splitvec].iov_len = split_ofs; + + /* We did cross a page boundary, so we write some now */ + if (jffs2_ebh_oob(c)) + ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo); + else + ret = jffs2_flash_direct_writev(c, outvecs, splitvec+1, outvec_to, &wbuf_retlen); + + if (ret < 0 || wbuf_retlen != PAGE_DIV(totlen)) { + /* At this point we have no problem, + c->wbuf is empty. However refile nextblock to avoid + writing again to same address. + */ + struct jffs2_eraseblock *jeb; + + spin_lock(&c->erase_completion_lock); + + jeb = c->blocks[outvec_to / c->sector_size]; + jffs2_block_refile(c, jeb, REFILE_ANYWAY); + + *retlen = 0; + spin_unlock(&c->erase_completion_lock); + goto exit; + } + + donelen += wbuf_retlen; + c->wbuf_ofs = PAGE_DIV(outvec_to) + PAGE_DIV(totlen); + + if (remainder) { + outvecs[splitvec].iov_base += split_ofs; + outvecs[splitvec].iov_len = remainder; + } else { + splitvec++; + } + + } else { + splitvec = 0; + } + + /* Now splitvec points to the start of the bits we have to copy + into the wbuf */ + wbuf_ptr = c->wbuf; + + for ( ; splitvec < outvec; splitvec++) { + /* Don't copy the wbuf into itself */ + if (outvecs[splitvec].iov_base == c->wbuf) + continue; + memcpy(wbuf_ptr, outvecs[splitvec].iov_base, outvecs[splitvec].iov_len); + wbuf_ptr += outvecs[splitvec].iov_len; + donelen += outvecs[splitvec].iov_len; + } + c->wbuf_len = wbuf_ptr - c->wbuf; + + /* If there's a remainder in the wbuf and it's a non-GC write, + remember that the wbuf affects this ino */ +alldone: + *retlen = donelen; + + if (jffs2_sum_active()) { + int res = jffs2_sum_add_kvec(c, invecs, count, (uint32_t) to); + if (res) + return res; + } + + if (c->wbuf_len && ino) + jffs2_wbuf_dirties_inode(c, ino); + + ret = 0; + +exit: + up_write(&c->wbuf_sem); + return ret; +} + +/* + * This is the entry for flash write. + * Check, if we work on NAND FLASH, if so build an kvec and write it via vritev +*/ +int jffs2_flash_write(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *retlen, const u_char *buf) +{ + struct kvec vecs[1]; + + if (!jffs2_is_writebuffered(c)) + return jffs2_flash_direct_write(c, ofs, len, retlen, buf); + + vecs[0].iov_base = (unsigned char *) buf; + vecs[0].iov_len = len; + return jffs2_flash_writev(c, vecs, 1, ofs, retlen, 0); +} + +/* + Handle readback from writebuffer and ECC failure return +*/ +int jffs2_flash_read(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *retlen, u_char *buf) +{ + loff_t orbf = 0, owbf = 0, lwbf = 0; + int ret; + + if (!jffs2_is_writebuffered(c)) + return c->mtd->read(c->mtd, ofs, len, retlen, buf); + + /* Read flash */ + down_read(&c->wbuf_sem); + if (jffs2_ebh_oob(c)) + ret = c->mtd->read_ecc(c->mtd, ofs, len, retlen, buf, NULL, c->oobinfo); + else + ret = c->mtd->read(c->mtd, ofs, len, retlen, buf); + + if ( (ret == -EBADMSG) && (*retlen == len) ) { + printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n", + len, ofs); + /* + * We have the raw data without ECC correction in the buffer, maybe + * we are lucky and all data or parts are correct. We check the node. + * If data are corrupted node check will sort it out. + * We keep this block, it will fail on write or erase and the we + * mark it bad. Or should we do that now? But we should give him a chance. + * Maybe we had a system crash or power loss before the ecc write or + * a erase was completed. + * So we return success. :) + */ + ret = 0; + } + + /* if no writebuffer available or write buffer empty, return */ + if (!c->wbuf_pagesize || !c->wbuf_len) + goto exit; + + /* if we read in a different block, return */ + if (SECTOR_ADDR(ofs) != SECTOR_ADDR(c->wbuf_ofs)) + goto exit; + + if (ofs >= c->wbuf_ofs) { + owbf = (ofs - c->wbuf_ofs); /* offset in write buffer */ + if (owbf > c->wbuf_len) /* is read beyond write buffer ? */ + goto exit; + lwbf = c->wbuf_len - owbf; /* number of bytes to copy */ + if (lwbf > len) + lwbf = len; + } else { + orbf = (c->wbuf_ofs - ofs); /* offset in read buffer */ + if (orbf > len) /* is write beyond write buffer ? */ + goto exit; + lwbf = len - orbf; /* number of bytes to copy */ + if (lwbf > c->wbuf_len) + lwbf = c->wbuf_len; + } + if (lwbf > 0) + memcpy(buf+orbf,c->wbuf+owbf,lwbf); + +exit: + up_read(&c->wbuf_sem); + return ret; +} + +/* + * Check if jffs2_flash_read was successful + */ +int jffs2_flash_read_safe(struct jffs2_sb_info *c, uint32_t ofs, int len, u_char *buf) +{ + size_t retlen; + int err = jffs2_flash_read(c, ofs, len, &retlen, buf); + + /* did the read succeed? */ + if (unlikely(err)) { + JFFS2_ERROR("can not read %d bytes from 0x%08x, error code: %d.\n", len, ofs, err); + return -EIO; + } + + /* did we read all? */ + if (unlikely(retlen != len)) { + JFFS2_ERROR("short read at 0x%08x: %d instead of %d.\n", ofs, retlen, len); + return -EIO; + } + return 0; +} + +/* + * Check, if the out of band area is empty + */ + +int jffs2_check_oob_empty( struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t data_len) +{ + size_t offset, retlen; + uint32_t i = 0, j, oob_nr; + unsigned char *buf; + int oob_size, ret; + + offset = jeb->offset; + oob_size = c->mtd->oobsize; + oob_nr = (data_len+c->fsdata_len-1)/c->fsdata_len; + if (oob_nr < 4) oob_nr = 4; + buf = kmalloc(oob_size * oob_nr, GFP_KERNEL); + ret = c->mtd->read_oob(c->mtd, offset, oob_size * oob_nr, &retlen, buf); + + for (i=0; i<oob_nr; i++) { + for (j=0; j<oob_size; j++) { + if (data_len && j>=c->fsdata_pos && j<c->fsdata_pos + c->fsdata_len) { + data_len--; + continue; + } + if (buf[i*oob_size+j] != 0xFF) { + ret = 1; + goto out; + } + } + } + +out: + kfree(buf); + return ret; +} + +/* +* Scan for a valid cleanmarker and for bad blocks +* For virtual blocks (concatenated physical blocks) check the cleanmarker +* only in the first page of the first physical block, but scan for bad blocks in all +* physical blocks +*/ +int jffs2_check_nand_cleanmarker_ebh (struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t *data_len) +{ + size_t offset, retlen; + int oob_size; + uint32_t oob_nr, total_len; + unsigned char *buf; + int ret; + struct jffs2_unknown_node *n, un; + struct jffs2_raw_ebh eh; + uint32_t read_in = 0, i = 0, copy_len, node_crc; + + offset = jeb->offset; + *data_len = 0; + + if (c->mtd->block_isbad (c->mtd, offset)) { + D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker_ebh(): Bad block at %08x\n", jeb->offset)); + return 2; + } + + oob_size = c->mtd->oobsize; + oob_nr = (sizeof(struct jffs2_raw_ebh)+c->fsdata_len-1)/c->fsdata_len; + total_len = oob_size * oob_nr; + + buf = kmalloc(total_len, GFP_KERNEL); + if (!buf) { + return -ENOMEM; + } + ret = c->mtd->read_oob(c->mtd, offset, total_len, &retlen, buf); + if (ret) { + D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker_ebh(): Read OOB failed %d for block at %08x\n", ret, jeb->offset)); + goto out; + } + if (retlen < total_len) { + D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker_ebh(): Read OOB return short read (%zd bytes not %d) for block at %08x\n", retlen, total_len, jeb->offset)); + ret = -EIO; + goto out; + } + + i = 0; + read_in = 0; + while (read_in < sizeof(struct jffs2_unknown_node)) { + copy_len = min_t(uint32_t, c->fsdata_len, sizeof(struct jffs2_unknown_node) - read_in); + memcpy((unsigned char *)&un + read_in, &buf[oob_size*i + c->fsdata_pos], copy_len); + read_in += copy_len; + i++; + } + n = &un; + + if (je16_to_cpu(n->magic) != JFFS2_MAGIC_BITMASK) { + D1 (printk(KERN_WARNING "jffs2_check_nand_cleanmarker_ebh(): Cleanmarker node not detected in block at %08x\n", jeb->offset)); + ret = 1; + goto out; + } + + if (je16_to_cpu(n->nodetype) == JFFS2_NODETYPE_CLEANMARKER) { + if (je32_to_cpu(n->totlen) == 8) { + *data_len = 8; + ret = 0; + } else { + ret = 1; + } + goto out; + }else if (je16_to_cpu(n->nodetype) == JFFS2_NODETYPE_ERASEBLOCK_HEADER) { + /* Read the scattered data(in buf[]) into struct jffs2_raw_ebh */ + i = 0; + read_in = 0; + while (read_in < sizeof(struct jffs2_raw_ebh)) { + copy_len = min_t(uint32_t, c->fsdata_len, sizeof(struct jffs2_raw_ebh) - read_in); + memcpy((unsigned char *)&eh + read_in, &buf[oob_size*i + c->fsdata_pos], copy_len); + read_in += copy_len; + i++; + } + + node_crc = crc32(0, &eh + sizeof(struct jffs2_unknown_node) + 4, sizeof(struct jffs2_raw_ebh) - sizeof(struct jffs2_unknown_node) - 4); + if (node_crc != je32_to_cpu(eh.node_crc)) { + ret = 1; + goto out; + } + + if ((JFFS2_EBH_INCOMPAT_FSET | eh.incompat_fset) != JFFS2_EBH_INCOMPAT_FSET) { + printk(KERN_NOTICE "The incompat_fset of fs image EBH %d execeed the incompat_fset \ + of JFFS2 module %d. Reject to mount.\n", eh.incompat_fset, JFFS2_EBH_INCOMPAT_FSET); + ret = -EINVAL; + goto out; + } + if ((JFFS2_EBH_ROCOMPAT_FSET | eh.rocompat_fset) != JFFS2_EBH_ROCOMPAT_FSET) { + printk(KERN_NOTICE "Read-only compatible EBH feature found at offset 0x%08x\n ", jeb->offset); + if (!(jffs2_is_readonly(c))) { + ret = -EROFS; + goto out; + } + } + + EBFLAGS_SET_EBH(jeb); + jeb->erase_count = je32_to_cpu(eh.erase_count); + record_erase_count(c, jeb); + *data_len = je32_to_cpu(eh.totlen); + ret = 0; + }else { + ret = 1; + } +out: + kfree(buf); + return ret; +} + +int jffs2_write_nand_ebh(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) +{ + uint32_t i = 0, written = 0, write_len = 0; + int ret; + size_t retlen; + struct jffs2_raw_ebh ebh = { + .magic = cpu_to_je16(JFFS2_MAGIC_BITMASK), + .nodetype = cpu_to_je16(JFFS2_NODETYPE_ERASEBLOCK_HEADER), + .totlen = cpu_to_je32(sizeof(struct jffs2_raw_ebh)), + .reserved = 0, + .compat_fset = JFFS2_EBH_COMPAT_FSET, + .incompat_fset = JFFS2_EBH_INCOMPAT_FSET, + .rocompat_fset = JFFS2_EBH_ROCOMPAT_FSET, + }; + + ebh.erase_count = cpu_to_je32(jeb->erase_count); + + ebh.hdr_crc = cpu_to_je32(crc32(0, &ebh, sizeof(struct jffs2_unknown_node)-4)); + ebh.node_crc = cpu_to_je32(crc32(0, (unsigned char *)&ebh + sizeof(struct jffs2_unknown_node) + 4, + sizeof(struct jffs2_raw_ebh) - sizeof(struct jffs2_unknown_node) - 4)); + + while (written < sizeof(struct jffs2_raw_ebh)) { + write_len = min_t(uint32_t, c->fsdata_len, sizeof(struct jffs2_raw_ebh) - written); + ret = jffs2_flash_write_oob(c, jeb->offset + c->mtd->oobblock*i + c->fsdata_pos, + write_len, &retlen, (unsigned char *)&ebh + written); + if (ret || retlen != write_len) { + D1(printk(KERN_WARNING "jffs2_write_nand_ebh(): Write failed for block at %08x: error %d\n", jeb->offset, ret)); + return ret; + } + written += write_len; + i++; + } + return 0; +} + +/* + * On NAND we try to mark this block bad. If the block was erased more + * than MAX_ERASE_FAILURES we mark it finaly bad. + * Don't care about failures. This block remains on the erase-pending + * or badblock list as long as nobody manipulates the flash with + * a bootloader or something like that. + */ + +int jffs2_write_nand_badblock(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t bad_offset) +{ + int ret; + + /* if the count is < max, we try to write the counter to the 2nd page oob area */ + if( ++jeb->bad_count < MAX_ERASE_FAILURES) + return 0; + + if (!c->mtd->block_markbad) + return 1; // What else can we do? + + D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Marking bad block at %08x\n", bad_offset)); + ret = c->mtd->block_markbad(c->mtd, bad_offset); + + if (ret) { + D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Write failed for block at %08x: error %d\n", jeb->offset, ret)); + return ret; + } + return 1; +} + +#define NAND_JFFS2_OOB16_FSDALEN 8 + +static struct nand_oobinfo jffs2_oobinfo_docecc = { + .useecc = MTD_NANDECC_PLACE, + .eccbytes = 6, + .eccpos = {0,1,2,3,4,5} +}; + + +static int jffs2_nand_set_oobinfo(struct jffs2_sb_info *c) +{ + struct nand_oobinfo *oinfo = &c->mtd->oobinfo; + + /* Do this only, if we have an oob buffer */ + if (!c->mtd->oobsize) + return 0; + + /* Cleanmarker is out-of-band, so inline size zero */ + c->cleanmarker_size = 0; + c->ebh_size = 0; + + /* Should we use autoplacement ? */ + if (oinfo && oinfo->useecc == MTD_NANDECC_AUTOPLACE) { + D1(printk(KERN_DEBUG "JFFS2 using autoplace on NAND\n")); + /* Get the position of the free bytes */ + if (!oinfo->oobfree[0][1]) { + printk (KERN_WARNING "jffs2_nand_set_oobinfo(): Eeep. Autoplacement selected and no empty space in oob\n"); + return -ENOSPC; + } + c->fsdata_pos = oinfo->oobfree[0][0]; + c->fsdata_len = oinfo->oobfree[0][1]; + } else { + /* This is just a legacy fallback and should go away soon */ + switch(c->mtd->ecctype) { + case MTD_ECC_RS_DiskOnChip: + printk(KERN_WARNING "JFFS2 using DiskOnChip hardware ECC without autoplacement. Fix it!\n"); + c->oobinfo = &jffs2_oobinfo_docecc; + c->fsdata_pos = 6; + c->fsdata_len = NAND_JFFS2_OOB16_FSDALEN; + c->badblock_pos = 15; + break; + + default: + D1(printk(KERN_DEBUG "JFFS2 on NAND. No autoplacment info found\n")); + return -EINVAL; + } + } + return 0; +} + +/* To check if the OOB area has enough space for eraseblock header */ +static int jffs2_nand_check_oobspace_for_ebh(struct jffs2_sb_info *c) +{ + uint32_t pages_per_eraseblock, available_oob_space; + + pages_per_eraseblock = c->sector_size/c->mtd->oobblock; + available_oob_space = c->fsdata_len * pages_per_eraseblock; + if (available_oob_space < sizeof(struct jffs2_raw_ebh)) { + printk(KERN_NOTICE "The OOB area(%d) is not big enough to hold eraseblock_header(%d), reject to mount.\n", + available_oob_space, sizeof(struct jffs2_raw_ebh)); + return -EINVAL; + } + return 0; +} + +int jffs2_nand_flash_setup(struct jffs2_sb_info *c) +{ + int res; + + /* Initialise write buffer */ + init_rwsem(&c->wbuf_sem); + c->wbuf_pagesize = c->mtd->oobblock; + c->wbuf_ofs = 0xFFFFFFFF; + + c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); + if (!c->wbuf) + return -ENOMEM; + + res = jffs2_nand_set_oobinfo(c); + if (res) { + return res; + } + + res = jffs2_nand_check_oobspace_for_ebh(c); + +#ifdef BREAKME + if (!brokenbuf) + brokenbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); + if (!brokenbuf) { + kfree(c->wbuf); + return -ENOMEM; + } + memset(brokenbuf, 0xdb, c->wbuf_pagesize); +#endif + return res; +} + +void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c) +{ + kfree(c->wbuf); +} + +int jffs2_dataflash_setup(struct jffs2_sb_info *c) { + c->cleanmarker_size = 0; /* No cleanmarkers needed */ + + /* Initialize write buffer */ + init_rwsem(&c->wbuf_sem); + + + c->wbuf_pagesize = c->mtd->erasesize; + + /* Find a suitable c->sector_size + * - Not too much sectors + * - Sectors have to be at least 4 K + some bytes + * - All known dataflashes have erase sizes of 528 or 1056 + * - we take at least 8 eraseblocks and want to have at least 8K size + * - The concatenation should be a power of 2 + */ + + c->sector_size = 8 * c->mtd->erasesize; + + while (c->sector_size < 8192) { + c->sector_size *= 2; + } + + /* It may be necessary to adjust the flash size */ + c->flash_size = c->mtd->size; + + if ((c->flash_size % c->sector_size) != 0) { + c->flash_size = (c->flash_size / c->sector_size) * c->sector_size; + printk(KERN_WARNING "JFFS2 flash size adjusted to %dKiB\n", c->flash_size); + }; + + c->wbuf_ofs = 0xFFFFFFFF; + c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); + if (!c->wbuf) + return -ENOMEM; + + printk(KERN_INFO "JFFS2 write-buffering enabled buffer (%d) erasesize (%d)\n", c->wbuf_pagesize, c->sector_size); + + return 0; +} + +void jffs2_dataflash_cleanup(struct jffs2_sb_info *c) { + kfree(c->wbuf); +} + +int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c) { + /* Cleanmarker is actually larger on the flashes */ + c->cleanmarker_size = 16; + c->ebh_size = 24; + + /* Initialize write buffer */ + init_rwsem(&c->wbuf_sem); + c->wbuf_pagesize = c->mtd->eccsize; + c->wbuf_ofs = 0xFFFFFFFF; + + c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); + if (!c->wbuf) + return -ENOMEM; + + return 0; +} + +void jffs2_nor_ecc_flash_cleanup(struct jffs2_sb_info *c) { + kfree(c->wbuf); +} + +int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c) { + /* Cleanmarker currently occupies a whole programming region */ + c->cleanmarker_size = MTD_PROGREGION_SIZE(c->mtd); + c->ebh_size = MTD_PROGREGION_SIZE(c->mtd); + + /* Initialize write buffer */ + init_rwsem(&c->wbuf_sem); + c->wbuf_pagesize = MTD_PROGREGION_SIZE(c->mtd); + c->wbuf_ofs = 0xFFFFFFFF; + + c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); + if (!c->wbuf) + return -ENOMEM; + + return 0; +} + +void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c) { + kfree(c->wbuf); +} + +int jffs2_block_mtd_setup(struct jffs2_sb_info *c) { + /* Use a 512-byte sector as wbuf region, for performance */ + /* Cleanmarker currently occupies a whole programming region */ + c->cleanmarker_size = 512; + c->ebh_size = 512; + + /* Initialize write buffer */ + init_rwsem(&c->wbuf_sem); + c->wbuf_pagesize = 512; + c->wbuf_ofs = 0xFFFFFFFF; + + c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); + if (!c->wbuf) + return -ENOMEM; + + return 0; +} + +void jffs2_block_mtd_cleanup(struct jffs2_sb_info *c) { + kfree(c->wbuf); +} |