summaryrefslogtreecommitdiffstats
path: root/linux-2.4.x/include/linux/mtd/mtd.h
diff options
context:
space:
mode:
Diffstat (limited to 'linux-2.4.x/include/linux/mtd/mtd.h')
-rw-r--r--linux-2.4.x/include/linux/mtd/mtd.h227
1 files changed, 93 insertions, 134 deletions
diff --git a/linux-2.4.x/include/linux/mtd/mtd.h b/linux-2.4.x/include/linux/mtd/mtd.h
index b186e6c..fbc075b 100644
--- a/linux-2.4.x/include/linux/mtd/mtd.h
+++ b/linux-2.4.x/include/linux/mtd/mtd.h
@@ -1,123 +1,45 @@
-
-/* $Id: mtd.h,v 1.33 2001/06/09 00:08:59 dwmw2 Exp $ */
+/*
+ * $Id: mtd.h,v 1.62 2005/11/29 20:01:30 gleixner Exp $
+ *
+ * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * Released under GPL
+ */
#ifndef __MTD_MTD_H__
#define __MTD_MTD_H__
-#ifdef __KERNEL__
+#ifndef __KERNEL__
+#error This is a kernel header. Perhaps include mtd-user.h instead?
+#endif
#include <linux/config.h>
-#include <linux/version.h>
#include <linux/types.h>
-#include <linux/mtd/compatmac.h>
#include <linux/module.h>
#include <linux/uio.h>
+#include <linux/notifier.h>
-#endif /* __KERNEL__ */
-
-struct erase_info_user {
- u_int32_t start;
- u_int32_t length;
-};
-
-struct mtd_oob_buf {
- u_int32_t start;
- u_int32_t length;
- unsigned char *ptr;
-};
-
+#include <linux/mtd/compatmac.h>
+#include <mtd/mtd-abi.h>
#define MTD_CHAR_MAJOR 90
#define MTD_BLOCK_MAJOR 31
#define MAX_MTD_DEVICES 16
-
-
-#define MTD_ABSENT 0
-#define MTD_RAM 1
-#define MTD_ROM 2
-#define MTD_NORFLASH 3
-#define MTD_NANDFLASH 4
-#define MTD_PEROM 5
-#define MTD_OTHER 14
-#define MTD_UNKNOWN 15
-
-
-
-#define MTD_CLEAR_BITS 1 // Bits can be cleared (flash)
-#define MTD_SET_BITS 2 // Bits can be set
-#define MTD_ERASEABLE 4 // Has an erase function
-#define MTD_WRITEB_WRITEABLE 8 // Direct IO is possible
-#define MTD_VOLATILE 16 // Set for RAMs
-#define MTD_XIP 32 // eXecute-In-Place possible
-#define MTD_OOB 64 // Out-of-band data (NAND flash)
-#define MTD_ECC 128 // Device capable of automatic ECC
-
-// Some common devices / combinations of capabilities
-#define MTD_CAP_ROM 0
-#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
-#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE)
-#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB)
-#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS)
-
-
-// Types of automatic ECC/Checksum available
-#define MTD_ECC_NONE 0 // No automatic ECC available
-#define MTD_ECC_RS_DiskOnChip 1 // Automatic ECC on DiskOnChip
-#define MTD_ECC_SW 2 // SW ECC for Toshiba & Samsung devices
-
-struct mtd_info_user {
- u_char type;
- u_int32_t flags;
- u_int32_t size; // Total size of the MTD
- u_int32_t erasesize;
- u_int32_t oobblock; // Size of OOB blocks (e.g. 512)
- u_int32_t oobsize; // Amount of OOB data per block (e.g. 16)
- u_int32_t ecctype;
- u_int32_t eccsize;
-};
-
-struct region_info_user {
- u_int32_t offset; /* At which this region starts,
- * from the beginning of the MTD */
- u_int32_t erasesize; /* For this region */
- u_int32_t numblocks; /* Number of blocks in this region */
- u_int32_t regionindex;
-};
-
-#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
-#define MEMERASE _IOW('M', 2, struct erase_info_user)
-#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
-#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
-#define MEMLOCK _IOW('M', 5, struct erase_info_user)
-#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
-#define MEMGETREGIONCOUNT _IOR('M', 7, int)
-#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
-#define MEMREADDATA _IOWR('M', 9, struct mtd_oob_buf)
-#define MEMWRITEDATA _IOWR('M', 10, struct mtd_oob_buf)
-
-#ifndef __KERNEL__
-
-typedef struct mtd_info_user mtd_info_t;
-typedef struct erase_info_user erase_info_t;
-typedef struct region_info_user region_info_t;
-
- /* User-space ioctl definitions */
-
-
-#else /* __KERNEL__ */
-
-
#define MTD_ERASE_PENDING 0x01
#define MTD_ERASING 0x02
#define MTD_ERASE_SUSPEND 0x04
#define MTD_ERASE_DONE 0x08
#define MTD_ERASE_FAILED 0x10
+/* If the erase fails, fail_addr might indicate exactly which block failed. If
+ fail_addr = 0xffffffff, the failure was not at the device level or was not
+ specific to any particular block. */
struct erase_info {
struct mtd_info *mtd;
u_int32_t addr;
u_int32_t len;
+ u_int32_t fail_addr;
u_long time;
u_long retries;
u_int dev;
@@ -150,45 +72,75 @@ struct mtd_info {
u_int32_t ecctype;
u_int32_t eccsize;
+ /*
+ * Reuse some of the above unused fields in the case of NOR flash
+ * with configurable programming regions to avoid modifying the
+ * user visible structure layout/size. Only valid when the
+ * MTD_PROGRAM_REGIONS flag is set.
+ * (Maybe we should have an union for those?)
+ */
+#define MTD_PROGREGION_SIZE(mtd) (mtd)->oobblock
+#define MTD_PROGREGION_CTRLMODE_VALID(mtd) (mtd)->oobsize
+#define MTD_PROGREGION_CTRLMODE_INVALID(mtd) (mtd)->ecctype
+
// Kernel-only stuff starts here.
char *name;
int index;
+ // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
+ struct nand_oobinfo oobinfo;
+ u_int32_t oobavail; // Number of bytes in OOB area available for fs
+
/* Data for variable erase regions. If numeraseregions is zero,
- * it means that the whole device has erasesize as given above.
+ * it means that the whole device has erasesize as given above.
*/
int numeraseregions;
- struct mtd_erase_region_info *eraseregions;
+ struct mtd_erase_region_info *eraseregions;
/* This really shouldn't be here. It can go away in 2.5 */
u_int32_t bank_size;
- struct module *module;
int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
/* This stuff for eXecute-In-Place */
int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
- void (*unpoint) (struct mtd_info *mtd, u_char * addr);
+ void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
- int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf);
- int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf);
+ int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
+ int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
- /* iovec-based read/write methods. We need these especially for NAND flash,
+ /*
+ * Methods to access the protection register area, present in some
+ * flash devices. The user data is one time programmable but the
+ * factory data is read only.
+ */
+ int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
+ int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+ int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
+ int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+ int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+ int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
+
+ /* kvec-based read/write methods. We need these especially for NAND flash,
with its limited number of write cycles per erase.
- NB: The 'count' parameter is the number of _vectors_, each of
+ NB: The 'count' parameter is the number of _vectors_, each of
which contains an (ofs, len) tuple.
*/
- int (*readv) (struct mtd_info *mtd, struct iovec *vecs, unsigned long count, loff_t from, size_t *retlen);
- int (*writev) (struct mtd_info *mtd, const struct iovec *vecs, unsigned long count, loff_t to, size_t *retlen);
+ int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
+ int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
+ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
+ int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
+ int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
+ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
/* Sync */
void (*sync) (struct mtd_info *mtd);
@@ -201,7 +153,16 @@ struct mtd_info {
int (*suspend) (struct mtd_info *mtd);
void (*resume) (struct mtd_info *mtd);
+ /* Bad block management functions */
+ int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
+ int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
+
+ struct notifier_block reboot_notifier; /* default mode before reboot */
+
void *priv;
+
+ struct module *owner;
+ int usecount;
};
@@ -210,39 +171,27 @@ struct mtd_info {
extern int add_mtd_device(struct mtd_info *mtd);
extern int del_mtd_device (struct mtd_info *mtd);
-extern struct mtd_info *__get_mtd_device(struct mtd_info *mtd, int num);
-
-static inline struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
-{
- struct mtd_info *ret;
-
- ret = __get_mtd_device(mtd, num);
-
- if (ret && ret->module && !try_inc_mod_count(ret->module))
- return NULL;
+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
- return ret;
-}
-
-static inline void put_mtd_device(struct mtd_info *mtd)
-{
- if (mtd->module)
- __MOD_DEC_USE_COUNT(mtd->module);
-}
+extern void put_mtd_device(struct mtd_info *mtd);
struct mtd_notifier {
void (*add)(struct mtd_info *mtd);
void (*remove)(struct mtd_info *mtd);
- struct mtd_notifier *next;
+ struct list_head list;
};
extern void register_mtd_user (struct mtd_notifier *new);
extern int unregister_mtd_user (struct mtd_notifier *old);
+int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+ unsigned long count, loff_t to, size_t *retlen);
+
+int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
+ unsigned long count, loff_t from, size_t *retlen);
-#ifndef MTDC
#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
@@ -254,8 +203,18 @@ extern int unregister_mtd_user (struct mtd_notifier *old);
#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
-#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
-#endif /* MTDC */
+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+void mtd_erase_callback(struct erase_info *instr);
+#else
+static inline void mtd_erase_callback(struct erase_info *instr)
+{
+ if (instr->callback)
+ instr->callback(instr);
+}
+#endif
/*
* Debugging macro and defines
@@ -266,14 +225,14 @@ extern int unregister_mtd_user (struct mtd_notifier *old);
#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
#ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...) \
- if (n <= CONFIG_MTD_DEBUG_VERBOSE) { \
- printk(KERN_INFO args); \
- }
+#define DEBUG(n, args...) \
+ do { \
+ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
+ printk(KERN_INFO args); \
+ } while(0)
#else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...)
-#endif /* CONFIG_MTD_DEBUG */
+#define DEBUG(n, args...) do { } while(0)
-#endif /* __KERNEL__ */
+#endif /* CONFIG_MTD_DEBUG */
#endif /* __MTD_MTD_H__ */